AjapaReporter

Home life · Updated

How to Descale Breville Bambino: Step-by-Step

Time it takes20 min
Steps8in the list below
LevelEasyno special skills
Official sourceBrevillecheck it for changes

Quick answer Descaling your Breville Bambino removes mineral buildup inside the boiler and pipes, keeping your espresso hot and your shots consistent. You’ll need Breville Descaling Solution (or citric acid) and about 20 minutes.

What You’ll Need

  • Breville Descaling Solution (or food-grade citric acid, about 3 tablespoons per liter of water)
  • Water (filtered if possible)
  • A large container or bowl that fits under the group head and steam wand (at least 1 liter capacity)
  • Empty water tank
  • Clean cloth for wiping

Step-by-Step

  1. Prepare the machine: Turn off the Breville Bambino and unplug it. Remove the water tank, empty it, and rinse it out. Also remove the drip tray and the grid, and clean them with warm soapy water – you’ll need the space for the descale solution to drain.
  2. Mix the descaling solution: Fill the water tank with the recommended amount of Breville Descaling Solution, then add water up to the MAX line. If using citric acid, dissolve it in warm water first. Place the tank back onto the machine.
  3. Position the container: Place a large bowl or container under the group head (where the portafilter locks in) and another under the steam wand. Make sure they’re big enough to hold the solution that will flow out – at least 1 liter total capacity.
  4. Enter descale mode: Plug the machine back in and turn it on. While the machine is off, press and hold the 1-CUP and 2-CUP buttons simultaneously for about 5 seconds. The buttons will blink to indicate descale mode is active. (Note: button combinations may differ slightly by model – check your manual if this doesn’t work.)
  5. Run the descale cycle: With the machine in descale mode, press the 1-CUP button. The machine will start pumping the solution through the group head. Let it run until the water tank is empty. Then, press the 2-CUP button to run solution through the steam wand. The machine will alternate between the two – follow the prompts on the display if your model has one.
  6. Rinse the tank and refill: Once the tank is empty, the machine will stop. Remove the tank, rinse it thoroughly, and fill it with fresh water to the MAX line. Place it back on the machine.
  7. Rinse the system: Press the 1-CUP button again to run clean water through the group head, then the 2-CUP button for the steam wand. Repeat this rinse cycle at least twice to flush out any remaining descaling solution. The machine may prompt you to do this – follow the on-screen instructions if available.
  8. Finish and clean up: When the rinse cycles are complete, exit descale mode by pressing the 1-CUP and 2-CUP buttons together again (or the power button). Empty the bowls, wipe the machine dry, and reinsert the drip tray and grid. Your Bambino is now descaled and ready for brewing.

Common Mistakes

  • Skipping the rinse: Not rinsing thoroughly leaves descaling solution in the boiler, which can make your espresso taste bitter or metallic. Always run at least two full rinse cycles.
  • Using the wrong solution: Using a generic descaler that isn’t compatible with your machine can damage the internal seals. Stick to Breville’s own solution or a food-grade citric acid mix.
  • Not removing the portafilter and basket: Leaving them in place can trap solution and cause corrosion. Take them out before starting.
  • Forgetting to empty the drip tray: The drip tray will fill quickly during descaling – empty it beforehand to avoid overflow.
  • Interrupting the cycle: Stopping mid-cycle can leave solution in the boiler. Let the machine finish the entire process.

Tips

  • Descale regularly: Do this every 2-3 months if you use your machine daily, or more often if you have hard water. Regular descaling prevents scale from reducing water flow and heating efficiency.
  • Use filtered water: Filtered water has fewer minerals, so scale builds up slower. This means fewer descales and a longer machine life.
  • Clean the steam wand after each use: Wipe the wand with a damp cloth and purge it for a second after steaming milk. This prevents milk residue from hardening and mixing with scale.
  • Check your manual: Some Bambino models have a descale indicator light. When it lights up, it’s time to descale – don’t ignore it.

Troubleshooting

  • Machine won’t enter descale mode: Make sure the machine is off and unplugged for a few seconds, then plug it back in. Try pressing the buttons together for longer (up to 10 seconds). If it still doesn’t work, check your manual – some models require a different button combo.
  • Water not flowing: If the pump runs but no water comes out, the tank may not be seated properly. Remove and reinsert it, ensuring the valve at the bottom is pressed.
  • Descale solution leaking from the bottom: This can happen if the tank is overfilled or the machine is tilted. Stop the cycle, unplug, and check for spills. Wipe up any liquid and try again.
  • Machine still shows descale light after cycle: The light may need to be reset manually. Refer to your manual – often it’s holding the same buttons for a few seconds while the machine is on.
  • Espresso tastes off after descaling: Run a few more rinse cycles with fresh water. If the taste persists, remove the shower screen and clean it with a brush – residual solution can hide there.

Frequently Asked Questions

How often should I descale my Breville Bambino?

Every 2-3 months for daily use, or when the descale indicator lights up. If you have hard water, do it more frequently.

Can I use vinegar instead of descaling solution?

No. Vinegar can damage the internal rubber seals and leave a lingering smell. Use Breville’s descaling solution or food-grade citric acid.

How long does the descale cycle take?

About 15-20 minutes, including the rinse cycles. The actual descaling phase is shorter, but rinsing adds time.

Do I need to remove the water filter before descaling?

Yes, if your Bambino has a water filter in the tank, remove it before adding descaling solution. The solution can damage the filter.

What if I don’t have Breville Descaling Solution?

You can use food-grade citric acid – mix about 3 tablespoons per liter of water. It works effectively and is safe for the machine.

Can I descale the steam wand separately?

No, the descale cycle flushes solution through both the group head and steam wand. You don’t need to do them separately.

Sources: Breville. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.