Home life · Updated
How to Descale DeLonghi Dedica: Step-by-Step
Quick answer Descaling your DeLonghi Dedica removes limescale buildup that clogs the boiler and affects coffee temperature. Do it every 2–3 months or when the descale light flashes.
What You’ll Need
- DeLonghi EcoDecalk descaler (or a citric acid–based descaler suitable for espresso machines)
- Fresh water
- A large container (at least 1 liter) to collect the descaling solution
- A clean cloth or paper towels for wiping
- Empty water tank
Step-by-Step
- Turn off and unplug the machine. Make sure the Dedica is completely off and cool to the touch before you start. Unplug it from the power outlet.
- Remove the water tank and empty it. Take out the removable water tank, pour out any remaining water, and rinse it thoroughly with fresh water.
- Prepare the descaling solution. Follow the instructions on your descaler bottle. Typically, you mix a specific amount of descaler with water in the tank. For DeLonghi EcoDecalk, use the whole sachet and fill the tank to the MAX line with fresh water. Stir gently.
- Reinsert the tank and place a container under the steam wand. Put the tank back in place. Position a large container (at least 1 liter) under the steam wand to catch the solution that will come out.
- Turn on the machine and enter descale mode. Plug in the machine and turn it on. Press and hold the descale button (the one with a droplet icon) for about 10 seconds until the descale light starts blinking. The machine is now in descale mode.
- Run the descaling cycle. The machine will automatically pump the solution through the steam wand in intervals. Wait until the water tank is empty. This takes about 15 minutes. Do not turn off the machine during this time.
- Rinse the machine thoroughly. Once the descaling solution is fully dispensed, remove the tank, rinse it well, and fill it with fresh water to the MAX line. Place the container back under the steam wand. Turn the machine off and on again to exit descale mode, then run a few cycles of hot water through the steam wand to rinse out any remaining descaler. Repeat until the tank is empty.
- Clean and wipe down. Remove the drip tray and rinse it with fresh water. Wipe the steam wand and the exterior of the machine with a damp cloth. Your Dedica is now descaled and ready to use.
Common Mistakes
- Skipping the rinse cycle: Not rinsing thoroughly leaves descaler residue, which can affect the taste of your coffee and may irritate your stomach.
- Using the wrong descaler: Some descalers are not suitable for espresso machines and can damage the internal components. Stick to the DeLonghi EcoDecalk or a citric acid–based product.
- Descaling too often or not often enough: Over-descaling can be harsh on the machine, while under-descaling leads to limescale buildup. Follow the recommended frequency.
- Not placing a container under the steam wand: The solution will spill everywhere if you forget the container.
- Turning off the machine mid-cycle: Interrupting the descaling process can leave solution in the boiler and cause damage.
Tips
- Use filtered water: Using filtered or bottled water reduces the amount of limescale that builds up, extending the time between descaling.
- Descale when the light flashes: The Dedica has an indicator that reminds you when descaling is needed. Don’t ignore it.
- Run a water-only cycle after descaling: Even after the rinse cycle, run a cup of hot water through the steam wand to ensure no descaler remains.
- Keep the steam wand clean: Wipe the steam wand after each use to prevent milk residue from mixing with limescale.
- Store the machine properly: If you won’t use the machine for a while, empty the water tank and run a short rinse cycle to keep the boiler clean.
Troubleshooting
- Descale light stays on after the cycle: The machine may not have completed the full descaling process. Check if the water tank is empty. If not, run the cycle again. If the light persists, turn the machine off and on again.
- Machine doesn’t enter descale mode: Make sure the machine is on and the water tank is properly seated. Press and hold the descale button for a full 10 seconds.
- Water doesn’t flow through the steam wand: The steam wand may be clogged. Clean it with a pin or needle to remove any blockage, then try again.
- Descaling solution spills out of the machine: The container may be too small or positioned incorrectly. Use a larger container and ensure it’s centered under the steam wand.
- Machine is making unusual noises during descaling: This is normal as the pump pushes the solution through. If the noise continues after the cycle, run a water rinse.
Frequently Asked Questions
How often should I descale my DeLonghi Dedica?
DeLonghi recommends descaling every 2–3 months, depending on water hardness. If you use hard water, you may need to descale more frequently. The machine’s descale light will indicate when it’s time.
Can I use vinegar to descale my Dedica?
It’s not recommended. Vinegar can be too acidic and may damage the internal rubber seals and gaskets. Use a descaler specifically designed for espresso machines, like DeLonghi EcoDecalk.
What happens if I don’t descale my machine?
Limescale will build up in the boiler and pipes, reducing water flow, affecting coffee temperature, and eventually causing permanent damage. The machine may also become noisy and less efficient.
How long does the descaling process take?
The full process, including the rinse cycle, takes about 20–30 minutes. The descaling cycle itself runs for about 15 minutes.
Can I drink the descaling solution?
No, the descaling solution is not for consumption. It’s a chemical solution that removes limescale. Always rinse the machine thoroughly after descaling to remove any residue.
Do I need to remove the water filter before descaling?
Yes, if your Dedica has a water softener filter in the tank, remove it before descaling. The descaler can damage the filter. Replace the filter after descaling.
Related
- How to Phone From Canada to Mexico: Easy Steps
- How to Remove Stains from a Yeti Cup
- How to Remove Stains from Nonstick Pans
Sources: DeLonghi. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.