Home life · Updated
How to Descale a Delonghi Nespresso Machine
Quick answer Descaling removes limescale from your Delonghi Nespresso machine to keep it brewing at the right temperature and pressure. Run the descaling solution through the machine, then rinse with fresh water — it takes about 20 minutes.
What You’ll Need
- Delonghi Nespresso descaling solution (or a compatible citric acid-based descaler)
- Large container or bowl that fits under the coffee outlet and steam wand (if your model has one)
- Fresh water
- Clean cloth or paper towels for spills
Step-by-Step
- Turn off and unplug the machine. Make sure it is cool and unplugged from the power outlet before you start.
- Empty the drip tray and capsule container. Remove the drip tray, used capsule container, and water tank. Wash them with warm soapy water and dry them.
- Fill the water tank with descaling solution. Pour the contents of the Delonghi Nespresso descaling solution into the water tank, then add fresh water up to the MAX line. If your solution requires a specific ratio, follow the instructions on the bottle.
- Plug in and turn on the machine. Place a large container under the coffee outlet and also under the steam wand if your model has one.
- Start the descaling cycle. Press and hold the descaling button (often the same as the Lungo or a dedicated descaling button) for about 3 seconds until the light blinks. The machine will enter descaling mode. If your model doesn’t have a dedicated button, check the manual — on many Delonghi Nespresso machines, you press the Lungo button.
- Run the solution through. Press the Lungo button (or the button indicated) to start the flow. Let the solution run until the water tank is empty. The machine may pause automatically; if not, continue until the tank is empty.
- Rinse with fresh water. Empty the container, remove the water tank, rinse it thoroughly, and fill it with fresh water to the MAX line. Place the tank back, then run the machine again using the Lungo button until the tank is empty. Repeat this rinse cycle once more to ensure no descaling solution remains.
- Clean and reset. After rinsing, the machine should automatically exit descaling mode. If not, press the descaling button again to exit. Wipe the exterior with a damp cloth, reinsert the drip tray and capsule container, and run a short rinse cycle (a small cup of water) before your next coffee.
Common Mistakes
- Skipping the rinse cycle: If you don’t rinse thoroughly, the descaling solution will leave a bitter taste in your coffee and may damage the machine over time.
- Using vinegar instead of Nespresso solution: Vinegar can leave a strong smell and may not be fully rinsed out, and it can damage the internal seals.
- Not placing a container under the steam wand: On models with a steam wand, the solution also flows through the wand, so you need to collect it there too.
- Starting while the machine is hot: Always let the machine cool down before descaling to avoid burns and to ensure the solution works properly.
- Ignoring the “descale” indicator: When the light flashes, it’s time to descale. Delaying can cause scale buildup that affects performance.
Tips
- Descale every 3–6 months if you use the machine daily, or more often if you have hard water.
- Use only Nespresso-brand descaling solution or a citric acid descaler that is safe for espresso machines.
- Place a paper towel under the machine to catch any drips.
- After descaling, run a small cup of water through the machine to ensure no solution remains.
- If your machine has a steam wand, also wipe it with a damp cloth after descaling.
Troubleshooting
- The machine does not enter descaling mode: Make sure the machine is on and the water tank is filled. Press and hold the descaling button for at least 3 seconds. If it still doesn’t work, check your manual for the correct button combination — on some models you press the Lungo and Espresso buttons simultaneously.
- Water is not flowing: Check that the water tank is seated properly and the container is positioned correctly. If the machine is still not pumping, there may be a blockage; try running a rinse cycle with fresh water.
- The machine stops mid-cycle: This is normal on some models — they pause to let the solution sit. Wait a few minutes, then press the button again to continue.
- Descaling solution is leaking: Ensure the water tank is clicked in place and the drip tray is empty. If leaking continues, check the tank for cracks.
- The machine still shows “descale” after the process: Some models require you to exit descaling mode by pressing the descaling button again. If that doesn’t clear it, unplug the machine for a minute and plug it back in.
Frequently Asked Questions
How often should I descale my Delonghi Nespresso machine?
Generally every 3–6 months, depending on how often you use it and the hardness of your water. The machine will also flash a light when it’s time.
Can I use vinegar instead of the official descaling solution?
It’s not recommended. Vinegar can leave a lingering smell and may damage the internal rubber seals. Use a proper coffee machine descaler.
Do I need to remove the water tank before descaling?
Yes, you need to empty it and then fill it with the descaling solution mixed with water. After the descaling cycle, you’ll rinse the tank and refill it with fresh water.
How long does descaling take?
About 20 minutes in total, including the rinse cycles. The actual descaling run may take 5–10 minutes, and each rinse takes a few minutes.
Can I use the machine right after descaling?
Yes, but it’s best to run a small cup of fresh water through the machine first to ensure no solution remains.
What if my machine doesn’t have a descaling button?
Check the manual. On many Delonghi models, you enter descaling mode by pressing and holding the Lungo button for 3 seconds. If not, the manual will show the correct sequence.
Related
- Remove Water Stains from Quartz Countertops
- How to Descale a Keurig Slim
- How to Write a Hypothesis Statement
Sources: Nespresso. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.