AjapaReporter

Home life · Updated

How to Descale a Dishwasher: Step-by-Step Guide

Time it takes1 hr 30 min
Steps7in the list below
LevelEasyno special skills
Official sourceWhirlpoolcheck it for changes

Quick answer Descaling removes limescale and mineral buildup from your dishwasher, improving cleaning performance and extending its life. Run a descaling cycle with a commercial descaler or citric acid, then rinse.

What You’ll Need

  • Commercial dishwasher descaler (or citric acid powder)
  • White vinegar (as a mild alternative, though less effective)
  • Soft cloth or sponge
  • Old toothbrush (for stubborn spots)
  • Rubber gloves (optional, for handling descaler)

Step-by-Step

  1. Empty the dishwasher. Remove all dishes, racks, and silverware baskets. Check the filter and remove any large food debris.
  2. Clean the filter and spray arms. Rinse the filter under running water and use a toothbrush to dislodge any buildup. Check spray arm holes for clogs and clear them with a pin if needed.
  3. Add the descaler. Follow the product’s instructions for the correct amount. If using citric acid, place 2–3 tablespoons in the detergent dispenser or in a bowl on the top rack. Do not use both descaler and detergent together.
  4. Run a hot cycle. Select the hottest and longest cycle (e.g., Heavy or Pots & Pans). Let it run completely without interruption.
  5. Run a rinse cycle. After the descaling cycle finishes, run a short rinse cycle (or another empty hot cycle) to flush out any remaining descaler and loosened scale.
  6. Wipe down the interior. Use a damp cloth to wipe the door gasket, edges, and any visible limescale spots. For stubborn deposits, use a soft brush.
  7. Replace racks and run a final check. Put the racks and baskets back, then run a quick rinse cycle to ensure no residue remains. Check the bottom for any loose scale.

Common Mistakes

  • Using regular detergent instead of descaler. Detergent won’t dissolve limescale; it’s designed for food soils.
  • Skipping the filter cleaning. If the filter is clogged, descaling solution won’t circulate properly.
  • Overusing vinegar. Vinegar is acidic but can damage rubber gaskets over time. Use it sparingly and not more than once a month.
  • Not rinsing after descaling. Leaving descaler residue can affect future wash results and may leave a sour smell.
  • Descaling too often. If you have soft water, descaling every 3–6 months is enough. Over-descaling can wear down components.

Tips

  • Check your dishwasher manual for manufacturer recommendations on descaling frequency and approved products.
  • If you have hard water, descale more frequently—every 2–3 months.
  • Use a descaler specifically designed for dishwashers; they often include anti-corrosion agents.
  • Run the descaling cycle when the dishwasher is empty and at night to avoid interrupting your routine.
  • After descaling, wipe the door seal with a dry cloth to prevent mold.

Troubleshooting

  • White residue remains after descaling. Run another rinse cycle. If it persists, you may have extremely hard water; consider a water softener.
  • Dishwasher smells after descaling. Run a cycle with a cup of baking soda placed on the top rack to neutralize odors.
  • Descaler didn’t seem to work. You may have used too little or the cycle wasn’t hot enough. Try again with a higher dose and the hottest cycle.
  • Foaming during the cycle. If you accidentally used detergent, stop the cycle, scoop out foam, and rinse with water before restarting.
  • Error code appears. Some dishwashers have a maintenance mode. Consult your manual or the manufacturer’s support page for the specific code.

Frequently Asked Questions

How often should I descale my dishwasher?

For average water hardness, every 3–6 months. If you have hard water, do it more often, like every 2–3 months.

Can I use vinegar instead of a commercial descaler?

Yes, white vinegar is a mild acid that can help, but it’s less effective on heavy limescale and may damage rubber parts with frequent use. Use it as a temporary fix.

Is citric acid safe for my dishwasher?

Yes, citric acid is safe and effective. Use food-grade citric acid powder and avoid mixing with bleach or other chemicals.

Do I need to remove dishes before descaling?

Yes, always descale with an empty dishwasher. Descaler can leave residue on dishes and may not reach all surfaces if dishes block the spray.

Can I descale with lemon juice?

Lemon juice is acidic but may contain sugars that can leave a sticky residue. It’s better to use citric acid powder or a commercial descaler.

What if my dishwasher has a self-cleaning filter?

Self-cleaning filters still need occasional manual cleaning. Remove any large debris and wipe the filter area before descaling.

Sources: Whirlpool. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.