Home life · Updated
How to Descale a Nespresso Machine (Step-by-Step)
Quick answer Descaling removes limescale buildup that clogs your Nespresso machine, affecting temperature and flow. Run the official descaling solution through the machine, then rinse with fresh water.
Over time, minerals in water leave limescale inside your Nespresso machine. This can slow down brewing, make your coffee taste off, and even cause the machine to stop working. Descaling regularly keeps it running smoothly and your espresso tasting fresh. You’ll need a Nespresso descaling kit (or a compatible citric acid solution), a large container (at least 1 liter), and access to the water tank. Check your machine’s manual for specific instructions, as some models have a dedicated descaling mode.
What You’ll Need
- Nespresso descaling solution (official kit recommended)
- Large container (at least 1 liter/quart) to catch water
- Fresh water for rinsing
- Access to a sink or drain
Step-by-Step
- Prepare the machine: Turn off your Nespresso machine and unplug it. Remove any used capsules and empty the drip tray and capsule container. Clean the outside with a damp cloth.
- Mix the descaling solution: Follow the instructions on your descaling kit. Typically, you pour the solution into the empty water tank, then fill the tank to the max line with fresh water. If using a liquid solution, add it first, then water.
- Start the descaling cycle: Plug the machine back in and turn it on. Place the large container under the coffee outlet. For machines with a descaling mode (like Vertuo and some Original models), press and hold the button for the required time (usually 3-5 seconds) until the light blinks orange. If your machine doesn’t have a descaling mode, simply run a water cycle without a capsule.
- Run the solution through: The descaling cycle will automatically start and stop, or you may need to manually run water through the machine. Let the solution flow into the container until the water tank is empty. This may take about 10-15 minutes. Do not use the coffee for drinking.
- Let it sit (if required): Some models pause mid-cycle to let the solution work on stubborn limescale. If your machine stops, wait the recommended time (usually 5-10 minutes) before continuing.
- Rinse with fresh water: Empty the container, remove the water tank, and rinse it thoroughly. Fill it with fresh water to the max line, and place it back. Run a full cycle of plain water through the machine (without a capsule) to flush out any remaining solution. Repeat this rinsing process at least twice, or until the water coming out has no smell or taste of the solution.
- Clean the remaining parts: While rinsing, wash the drip tray and capsule container with warm soapy water. Dry them thoroughly before placing them back.
- Reset the descaling alert: Many Nespresso machines have an indicator light that blinks when descaling is needed. After descaling, the light may continue to blink. To reset it, turn the machine off and on, or press and hold the button for a few seconds (check your manual). The light should turn steady.
Common Mistakes
- Using vinegar or other alternatives: Nespresso does not recommend using vinegar or citric acid alone, as they can damage the internal seals and leave residue. Always use a descaling solution designed for coffee machines.
- Skipping the rinse cycle: Leaving descaling solution in the machine will make your coffee taste bitter or chemical. Always rinse thoroughly with fresh water.
- Descaling too often or too rarely: Over-descaling can strip the machine’s internal lubrication, while under-descaling leads to clogs. Follow the machine’s indicator or descale every 3-6 months, depending on water hardness.
- Forgetting to remove the capsule: Running a descaling cycle with a capsule in place will ruin the coffee and may damage the machine. Always remove the capsule first.
- Not emptying the drip tray: The descaling solution can overflow the drip tray, causing a mess. Empty it before you start.
Tips
- Place the machine near a sink or on a towel to catch any spills.
- Use the official Nespresso descaling kit for best results—it’s formulated for their machines.
- If your water is hard, you may need to descale more often. Check your machine’s manual for a water hardness setting.
- Run a short water cycle after descaling to ensure the tank is properly seated and there are no leaks.
- Keep your machine unplugged while cleaning to avoid electrical hazards.
Troubleshooting
- Machine doesn’t start the descaling cycle: Make sure the machine is plugged in and turned on. Some models require you to press the button for a specific number of seconds. Check your manual. If the light is blinking red, the machine may be too hot—wait for it to cool down.
- Water not flowing through: This could be a sign of a severe clog. Try running the descaling solution again, or manually pump water through by pressing the button multiple times. If it still doesn’t work, contact Nespresso support.
- Descaling solution leaking: Check that the water tank is properly seated and the container under the outlet is large enough. If the leak persists, inspect the tank for cracks.
- Indicator light still blinking after descaling: The machine may not have detected the descaling cycle. Try resetting by turning the machine off, unplugging it for 30 seconds, then plugging it back in and running a water cycle.
- Machine makes loud noises during descaling: This is normal as the pump works to push the solution through. If it becomes excessively loud or stops, turn off the machine and let it cool, then restart.
Frequently Asked Questions
How often should I descale my Nespresso machine?
Nespresso recommends descaling every 3 months or after every 300 capsules, whichever comes first. If you have hard water, you may need to do it more often.
Can I use vinegar to descale my Nespresso?
Nespresso advises against using vinegar. It can leave a lingering taste and may damage the internal components. Use a dedicated descaling solution.
Do I need to remove the capsule before descaling?
Yes, always remove any capsule from the machine before starting the descaling cycle. Running a capsule during descaling will ruin the coffee and could damage the machine.
How long does descaling take?
The whole process, including rinsing, typically takes about 20-30 minutes. The descaling cycle itself is about 10-15 minutes, followed by rinsing.
What if I accidentally drank the descaling solution?
If you accidentally consume a small amount, it’s not likely to cause serious harm, but you should drink water and contact a poison control center if you feel unwell. Always keep descaling solution out of reach of children.
Can I descale without a descaling kit?
It’s not recommended. Nespresso’s official solution is specifically formulated to be safe for their machines. Alternatives may not dissolve limescale effectively or could damage the machine.
Related
- How to Shrink Document Size: 7 Easy Ways
- How to Print XLS Files: 5 Easy Ways
- How to Call Ireland from Canada: Step-by-Step
Sources: Nespresso. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.