Home life · Updated
How to Descale a Nespresso DeLonghi Machine
Quick answer Descaling removes limescale buildup from your Nespresso DeLonghi machine, keeping it brewing at the right temperature and pressure. Run the official descaling solution through the machine every 3 months or after 300 capsules, then rinse thoroughly.
What You’ll Need
- Nespresso descaling solution (official kit recommended; it’s acid-based and safe for your machine)
- A large container or bowl that fits under the coffee outlet and steam wand (at least 1 liter capacity)
- Fresh water for rinsing
- A soft cloth for wiping spills
- Access to the machine’s manual (or the Nespresso app) if you need to check specific button sequences for your model
Step-by-Step
- Prepare the machine: Turn off your Nespresso DeLonghi and unplug it. Remove any used capsules and empty the drip tray and capsule container. Place a large container under the coffee outlet and, if your model has a steam wand, position it over the container as well.
- Mix the descaling solution: Pour the entire contents of the Nespresso descaling solution into the water tank. Add fresh water up to the MAX line (usually 1 liter or as indicated in your manual). Do not use more solution than recommended—it can leave a bitter residue.
- Enter descaling mode: Plug the machine back in and turn it on. The exact button combination varies by model (e.g., for many DeLonghi models, press and hold the lungo button for 5 seconds until the light blinks). Check your manual or the Nespresso app for your specific model. The machine will indicate it’s in descaling mode, often with a blinking light or a specific LED pattern.
- Start the descaling cycle: Once in descaling mode, press the lungo button (or the button indicated in your manual) to start the cycle. The machine will pump the solution through the system. Let it run until the water tank is empty. If your machine has a steam wand, you’ll need to open the steam valve briefly (about 10 seconds) during this step to descale the wand as well—follow the manual’s instructions.
- Wait and soak: After the solution has run through, some models require a waiting period (usually 5–10 minutes) to let the solution dissolve limescale inside. Leave the machine on and wait as instructed. Do not skip this step—it’s crucial for effective descaling.
- Rinse with fresh water: Empty the container, then remove the water tank and rinse it thoroughly. Fill it with fresh water to the MAX line and place it back. Run the same cycle (press the lungo button) to flush out any remaining solution. Repeat this rinse cycle at least 2–3 times, or until the water coming out has no smell or taste of the solution.
- Clean and reset: After rinsing, empty the drip tray and capsule container again, wipe down the outside with a damp cloth, and turn the machine off. Some models automatically exit descaling mode after the rinse; if not, consult your manual to exit. Your machine is now ready to brew.
Common Mistakes
- Skipping the soak time: Many people run the solution through and immediately rinse. The soak is what actually breaks down the limescale inside the boiler and pipes. Skipping it means you’ll descale more often.
- Using vinegar or citric acid: These are not recommended by Nespresso. They can leave residues and may damage the internal seals. Always use the official Nespresso solution.
- Not rinsing enough: If you taste a sour or bitter note in your next coffee, it’s likely leftover descaling solution. Rinse at least 2–3 full tanks of fresh water.
- Forgetting the steam wand: If your model has a steam wand, it also collects limescale. Not descaling it can lead to blockages and poor milk frothing.
- Starting with a full tank: The solution must be diluted correctly. Adding too much water makes it weak; too little can be harsh. Follow the ratio on the bottle.
Tips
- Set a reminder: Mark your calendar every 3 months or after 300 capsules. Many Nespresso machines also have a descaling alert light—don’t ignore it.
- Use the app: The Nespresso app often has a descaling guide specific to your model, with step-by-step animations.
- Place a towel under the machine: Descaling can sometimes leak a little from the drip tray area. Protect your counter.
- Run a brew cycle with a capsule after descaling: This helps remove any lingering solution from the brewing chamber. Discard that coffee.
- Keep the water tank clean: Regularly wipe the inside of the tank to prevent mineral buildup before it reaches the machine.
Troubleshooting
- Machine doesn’t enter descaling mode: Check your manual for the correct button sequence. For many DeLonghi models, it’s holding the lungo button for 5 seconds, but it varies. Try unplugging for 30 seconds and try again. If it still fails, contact Nespresso support.
- Water not flowing during descaling: This could indicate a blockage. Make sure the tank is seated properly and the outlet is not clogged. If the machine is heavily scaled, you may need to run the descaling cycle twice.
- Solution taste remains after rinsing: Run another full rinse cycle with fresh water. If the taste persists, run a brew cycle with a capsule (discard the coffee) and then rinse again.
- Machine leaks during descaling: Check that the drip tray is empty and properly positioned. Also ensure the water tank is not overfilled. If leaking continues, stop the cycle and contact support.
- Descaling alert won’t reset: Some models reset the alert automatically after a full descaling cycle. If not, check the manual for a reset combination (often holding the button for 10 seconds).
Frequently Asked Questions
How often should I descale my Nespresso DeLonghi?
Nespresso recommends descaling every 3 months or after 300 capsules, whichever comes first. If you use hard water, you may need to do it more frequently.
Can I use a generic descaling solution?
It’s best to use the official Nespresso solution. Generic descalers may not be formulated for the machine’s materials and could void your warranty.
Do I need to remove the water tank when descaling?
No, you fill the tank with the solution and water, then run the cycle. However, you should remove and rinse the tank thoroughly after descaling.
What if my machine doesn’t have a descaling mode?
All Nespresso DeLonghi machines have a descaling mode, but the activation method differs. Check your manual or the Nespresso app. If you can’t find it, contact Nespresso support.
Can I descale with vinegar?
Nespresso explicitly advises against using vinegar or citric acid. They can damage the internal components and leave residues that affect the taste of your coffee.
How long does the descaling process take?
The entire process, including rinsing, typically takes about 20–30 minutes. The actual descaling cycle is about 5–10 minutes, plus a 5–10 minute soak.
Related
- How to Shrink Computer Screen Display: 6 Easy Ways
- How to Shrink Clothes That Are Too Big
- How to Phone Jamaica from UK: Dialing Guide
Sources: Nespresso. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.