AjapaReporter

Home life · Updated

How to Descale Nespresso Original Machine

Time it takes20 min
Steps10in the list below
LevelEasyno special skills
Official sourceNespressocheck it for changes

Quick answer Descaling removes limescale and coffee oil buildup that can affect your machine's performance and the taste of your coffee. Do it every 3 months or after 300 capsules, using Nespresso descaling solution or a citric acid alternative.

What You’ll Need

  • Nespresso descaling solution (or food-grade citric acid)
  • Fresh water
  • A large container or bowl (at least 1 liter capacity)
  • A clean cloth or paper towels
  • Your machine’s user manual (for specific button sequences)

Step-by-Step

  1. Prepare the machine – Turn off the machine and unplug it. Remove any capsules from the capsule compartment and empty the drip tray and used capsule container.
  2. Mix the descaling solution – Follow the instructions on the Nespresso descaling kit. Typically, you’ll add the solution to the water tank, then fill the tank with fresh water up to the MAX line. If using citric acid, dissolve about 20g in 1 liter of water.
  3. Place a container under the coffee outlet – Put a large bowl or container (at least 1 liter) under the coffee spout to catch the liquid.
  4. Enter descaling mode – Plug in the machine and turn it on. The exact button combination varies by model (e.g., for many models, press and hold the Lungo button for 5 seconds until the buttons blink). Refer to your manual for the correct sequence. The machine will indicate descaling mode by blinking lights.
  5. Start the descaling cycle – Once in descaling mode, press the Lungo button (or the button indicated in your manual) to start. The machine will run the solution through the system. This may take several minutes. The machine may pause and resume automatically; follow any prompts.
  6. Let the solution sit – After the solution has run through, some models require you to let the machine sit for 10-15 minutes to dissolve stubborn scale. Check your manual for this step.
  7. Rinse the water tank – Empty the remaining descaling solution from the water tank and rinse the tank thoroughly with fresh water. Refill the tank with clean water to the MAX line.
  8. Run rinse cycles – With the container still in place, run at least two full cycles of fresh water through the machine (using the Lungo or same button as before) to flush out any remaining solution. Some models require you to exit descaling mode first; follow your manual.
  9. Exit descaling mode – After rinsing, exit descaling mode by pressing the same button combination you used to enter it, or as instructed in your manual. The lights should return to normal.
  10. Clean up and reset – Empty the container, clean the drip tray and capsule container, and wipe down the machine’s exterior with a damp cloth. Your machine is now ready to brew again.

Common Mistakes

  • Skipping the rinse cycle – Not rinsing thoroughly leaves descaling solution residue, which can affect the taste of your coffee and may be harmful if ingested.
  • Using vinegar – While some people use vinegar, Nespresso advises against it because it can damage the internal seals and leave a lingering taste. Stick to the official solution or citric acid.
  • Not removing the capsule – Forgetting to remove the used capsule before descaling can clog the system.
  • Descaling too often – Over-descaling can strip internal lubricants. Follow the recommended schedule (every 3 months or 300 capsules) unless you have very hard water.
  • Ignoring the manual – Button sequences vary by model. Guessing can leave you stuck in descaling mode or not start it at all.

Tips

  • Keep the original descaling kit instructions – they include model-specific steps.
  • If you have very hard water, consider descaling more frequently, but not more than once a month.
  • Place a towel under the container to catch any drips.
  • After descaling, run a shot of coffee and discard it to ensure the first cup tastes clean.
  • Store the descaling solution in a cool, dry place away from children.

Troubleshooting

  • Machine won’t enter descaling mode – Ensure the machine is on and the capsule compartment is empty. Try unplugging for 30 seconds and then retry the button sequence. Check your manual for the exact combination.
  • Descaling cycle stops midway – This can happen if the water tank runs dry or if the machine detects an issue. Refill the tank and press the button again. If it persists, unplug, wait 10 minutes, and restart.
  • Machine makes unusual noises – Some noise is normal during descaling as the pump pushes solution through. But if it sounds strained, stop, unplug, and check for blockages in the water tank or outlet.
  • Lights still blinking after descaling – You may not have exited descaling mode correctly. Repeat the exit button combination from the manual.
  • Residual taste of solution – Run additional rinse cycles with fresh water until the taste is gone. If it persists, the machine may need a deeper clean or a new water filter.

Frequently Asked Questions

How often should I descale my Nespresso Original machine?

Nespresso recommends descaling every 3 months or after 300 capsules, whichever comes first. If you have hard water, you may need to do it more frequently.

Can I use vinegar instead of Nespresso descaling solution?

It’s not recommended. Vinegar can damage the internal components and leave an unpleasant taste. Use the official Nespresso solution or a food-grade citric acid mixture.

How long does descaling take?

The full process, including rinsing, typically takes about 20-30 minutes. The actual descaling cycle may take 5-10 minutes, plus time for the solution to sit.

What happens if I don’t descale my machine?

Limescale can build up, reducing water flow, increasing heating time, and affecting the taste of your coffee. In severe cases, it can cause the machine to malfunction.

Can I use a generic descaling solution?

Yes, but make sure it’s compatible with espresso machines and follow the manufacturer’s instructions. Avoid harsh chemicals that could damage the machine.

My machine is still in warranty; will descaling void it?

No, descaling is a required maintenance task and will not void your warranty if done correctly with approved solutions. However, damage from improper descaling (like using vinegar) may not be covered.

Sources: Nespresso. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.