How to Fold a KYY Monitor Stand Safely

Most KYY portable monitors use a cover-style stand that folds into a protective cover, while some versions have a separate folding support. The method below is for a hinged stand or cover: check how yours opens before moving it, and do not assume every model has the same fastener or hinge. You should not need a tool for ordinary folding.

What You’ll Need

Your KYY monitor and its attached or separate stand.
A clean, flat surface, such as a desk or table.
The model’s instruction manual, if the hinge or closure is unfamiliar.

Step-by-Step

Disconnect the cables. Turn off the monitor and unplug its power and video cables. Remove any other connected accessories that could snag or put pressure on a port while you handle the stand.
Place the monitor securely. Set it face down on a clean, flat surface, with a soft, lint-free cloth beneath the screen. Keep the monitor supported across its body rather than balancing it on an edge. If the stand is separate, take it off the monitor first if its design allows this.
Identify the hinge and closure. Look for the stand’s fold line, hinge, magnetic flap, or retaining tab. Check the manual if you cannot tell which part moves. Do not pull on the screen, ports, or a thin cover panel to find the hinge.
Release the support gently. If a flap, tab, or magnetic closure holds the stand open, lift or separate that part with your fingers. For a kickstand with a friction hinge, hold the monitor body and move the support toward the panel in a controlled motion. Keep fingers out of the hinge gap.
Fold the stand flat. Guide the stand along its existing hinge until it rests against the monitor or lies flat in its cover position. Use light, even pressure near the hinge or support—not on the display surface. Stop if you feel strong resistance, hear cracking, or see the hinge twisting.
Secure and check it. Close the cover or fasten the stand using its original tab, magnet, or designed closure. Confirm that it sits flat and does not press on the screen. Store or carry the monitor with the folded stand protected from impacts and loose objects.

Common Mistakes

Folding the stand while the monitor is unsupported: The monitor can slide or tip. Lay it securely on a flat surface before changing the stand position.
Pressing on the display: Pressure can damage the panel. Apply force only to the stand or hinge area, and support the monitor body.
Forcing a tight hinge: A hinge may feel firm, but it should move along its intended path. Stop rather than bending the stand, twisting it sideways, or using a tool.
Folding the wrong part: Some KYY covers use a particular flap or fold direction. Inspect the existing crease and hinge, and check the model manual instead of guessing.
Leaving cables attached: A cable caught between the stand and monitor can be pinched or pull on a port. Disconnect cables before folding and check for anything trapped before closing.

Tips

Take a moment to note the open position before folding; that makes the hinge’s natural direction easier to recognize.
Keep the hinge and fold line free of grit, crumbs, and other debris, which can interfere with closing.
Use the stand’s own closure rather than tape, a clip, or extra pressure to keep it shut.
If your KYY monitor uses a removable stand, check whether it is designed to detach before trying to fold it. Do not pull a fixed cover away from the monitor.
When packing the monitor, avoid placing heavy objects on top of it and keep sharp items away from the screen.

Troubleshooting

The stand will not fold flat. Check whether a retaining tab or magnetic flap is still engaged, and make sure the support is moving at the hinge rather than bending elsewhere. Compare the fold direction with the manual. If it still resists, stop; forcing it can break the hinge or cover.

The stand folds but springs open. Look for the intended magnetic closure, tab, or cover flap and make sure it is aligned. Do not add an improvised fastener that could scratch the monitor or press on its screen.

The hinge creaks, cracks, or looks loose. Stop moving it and inspect for visible damage without pulling the hinge apart. Avoid using the stand until you have checked the product documentation or contacted KYY support for guidance.

The cover does not line up with the monitor. Reopen it gently and check that no cable or object is caught in the fold. Align the stand with its original crease; do not press the edges together if the panel is misaligned.

You cannot identify the stand type. Find the model number on the monitor or its packaging and consult the matching manual or KYY’s official support materials. KYY designs can vary, so instructions for a different model may not apply.

Frequently Asked Questions

Can I fold the KYY stand while the monitor is on?

It is better to turn the monitor off and disconnect its cables first. This reduces the chance of snagging a cable or putting strain on a port while handling the stand.

Does every KYY monitor stand fold the same way?

No. Some models use a folding cover, while others may have a separate or differently hinged support. Check the model-specific manual if the movement or closure is not obvious.

Should I remove the stand before folding it?

Only if the stand is designed to detach and its instructions show how. Do not pull at an attached cover or hinge that appears fixed to the monitor.

Is it normal for the hinge to feel firm?

A hinge can have some resistance, but it should move smoothly along its intended fold. Do not force it if it jams, twists, or makes a cracking sound.

Can I use the folded stand as a protective case?

If your model’s cover is designed to close over the monitor, use its original closure and check that the screen is not under pressure. A folding support alone may not protect the display during transport.

Sources: KYY. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.