AjapaReporter

Home life · Updated

How to Get Rid of Small Bed Bugs: Step-by-Step

Time it takes3 hr
Steps8in the list below
LevelMediumsome care needed
Official sourceEnvironmental Protection Agency (EPA)check it for changes

Quick answer To get rid of small bed bugs, wash all bedding and clothing in hot water, vacuum every crack and crevice, then use a steam cleaner or approved insecticide on hiding spots. Repeat the process weekly for at least a month to catch newly hatched bugs.

What You’ll Need

  • Vacuum with a hose attachment and crevice tool
  • Steam cleaner (reaching at least 200°F/93°C)
  • Hot water (above 120°F/49°C) for washing
  • Dryer or high heat setting
  • Sealed plastic bags (large trash bags or zip bags)
  • Bed bug interceptors (optional but helpful)
  • EPA-registered bed bug spray (optional)
  • Diatomaceous earth (food grade, optional)

Step-by-Step

  1. Confirm it’s bed bugs. Look for small, rust-colored stains on sheets, tiny pale yellow skins, or the bugs themselves (about the size of an apple seed, but young ones are smaller and lighter). Check mattress seams, box spring, and headboard cracks.
  2. Strip the bed immediately. Remove all sheets, pillowcases, blankets, and mattress pads. Place them directly into sealed plastic bags to avoid spreading bugs to other rooms.
  3. Wash and dry on high heat. Wash all bedding and clothing in hot water (at least 120°F/49°C). Then dry on the highest heat setting for at least 30 minutes. Heat kills all life stages—eggs, nymphs, and adults.
  4. Vacuum thoroughly. Use the crevice tool to vacuum mattress seams, box spring edges, bed frame joints, baseboards, carpet edges, and any cracks in furniture. Pay special attention to areas within 5 feet of the bed. After vacuuming, seal the vacuum bag or empty the canister into a plastic bag and dispose of it outside.
  5. Steam clean hiding spots. Use a steam cleaner on mattress seams, box spring, bed frame, and baseboards. Move the nozzle slowly (about 1 inch per second) to ensure heat penetrates. The steam must reach at least 200°F (93°C) to kill bugs and eggs.
  6. Treat with insecticide or diatomaceous earth (optional). If using an EPA-registered bed bug spray, apply it to cracks and crevices only, following label directions. Alternatively, dust food-grade diatomaceous earth into crevices—it dehydrates bugs, but it takes days to work. Do not apply both at the same time in the same spot.
  7. Encase the mattress and box spring. Use bed bug-proof encasements (zippered covers) to trap any remaining bugs and prevent new ones from entering. Leave them on for at least a year.
  8. Isolate the bed. Move the bed at least 6 inches away from walls and furniture. Place bed bug interceptors under each leg. These catch bugs trying to climb up. Keep the bed skirt off the floor.

Common Mistakes

  • Only treating the mattress—bed bugs hide in baseboards, furniture, and even electronics.
  • Using flea bombs or foggers—they don’t penetrate hiding spots and can scatter bugs.
  • Throwing away furniture prematurely—this spreads bugs to other rooms or neighbors.
  • Skipping the dryer for delicate items—if you can’t wash, heat in the dryer for 30 minutes.
  • Not repeating treatment—bed bug eggs hatch over weeks, so one pass isn’t enough.

Tips

  • Wash and dry one load at a time to avoid contaminating clean clothes.
  • Use a stiff brush to dislodge eggs before vacuuming.
  • Vacuum daily during treatment, then weekly for a month after.
  • Keep clutter off the floor to reduce hiding spots.
  • Inspect secondhand furniture before bringing it home.
  • If you live in an apartment, notify your landlord—bed bugs can travel through walls.

Troubleshooting

If you still see bed bugs after two weeks, you may have missed a hiding spot. Re-inspect thoroughly, especially behind picture frames, in electrical outlets (after turning off power), and under carpet edges. If you used a spray, check if it’s resistant—rotate to a different product class. If the infestation is severe or you’re in a multi-unit building, professional pest control is often necessary. They use heat treatments or targeted chemicals that are more effective than DIY methods.

Frequently Asked Questions

Can I get rid of bed bugs by washing in cold water?

No. Cold water won’t kill bed bugs. You need water at least 120°F (49°C) or a high-heat dryer cycle.

Do bed bug bites itch?

Yes, they often cause itchy red welts, but reactions vary. Some people have no reaction at all.

Can I use rubbing alcohol to kill bed bugs?

Rubbing alcohol can kill on contact, but it evaporates quickly and won’t reach hidden bugs or eggs. It’s also flammable, so it’s not recommended.

How long does it take to get rid of bed bugs?

With consistent treatment, you may see results in 2–4 weeks, but complete elimination can take several months because eggs hatch over time.

Do bed bugs only live in beds?

No. They hide in any crack or crevice near a host, including sofas, chairs, baseboards, and luggage.

Should I throw away my mattress?

Usually not. Encasing the mattress and treating it is effective. Throwing it away can spread bugs and isn’t necessary if the infestation is contained.

Sources: Environmental Protection Agency (EPA). Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.