How to Pair X08 Earbuds to Android Phone

Pairing your X08 wireless earbuds to an Android phone is a straightforward process that takes under a minute once you know the right button combination. These steps work for the standard X08 model (and most rebadged versions like X08 Pro or X08 Mini). Before you start, make sure both earbuds are charged—place them in the charging case with the lid open for at least 10 minutes if they’ve been sitting unused.

What You’ll Need

Your X08 earbuds and their charging case
An Android phone (version 6.0 or newer recommended)
A clean, dry cloth to wipe the charging contacts if the buds have been in a pocket

Step-by-Step

Take the earbuds out of the case. Remove both earbuds from the charging case. They will power on automatically. If they don’t, place them back in the case and take them out again.
Put them in pairing mode. Tap and hold the touch panel on both earbuds simultaneously for about 5 seconds. The LED indicator on each bud will start flashing red and blue alternately—this means they are in pairing mode and ready to connect.
Open Android’s Bluetooth settings. On your Android phone, swipe down from the top of the screen to open the notification shade, then tap the gear icon to open Settings. Go to “Connections” or “Bluetooth” (the exact wording varies by phone model). Toggle Bluetooth on if it isn’t already.
Start a new scan. On the Bluetooth settings page, tap “Pair new device” or “Scan for devices.” Your phone will start looking for nearby Bluetooth devices. Wait a few seconds for the list to populate.
Select “X08” from the list. Look for a device named “X08” (sometimes “X08 Pro” or “X08 Mini” depending on your variant). Tap on it. If prompted for a PIN, enter 0000 (four zeros) or 1234.
Confirm the pairing. Once you tap the device name, your phone will show a “Pairing” or “Connecting” message. When the connection is successful, the LED on the earbuds will stop flashing and the Bluetooth status on your phone will show “Connected.”
Test the audio. Play a song or a video on your phone. You should hear sound in both earbuds. If only one side plays, check that both buds are in your ears and that the volume is up on both the phone and the earbuds.

Common Mistakes

Not holding long enough: The most common issue is releasing the touch panel too early. You need to hold for a full 5 seconds until you see the red/blue flashing. If you let go after 2–3 seconds, the buds may just turn on or off.
Pairing one bud at a time: Some users try to pair each earbud separately. The X08 is designed to pair as a pair—keep both buds out of the case and in pairing mode together.
Old pairing data: If the earbuds were previously connected to another phone, they may try to reconnect to that device instead of entering pairing mode. Make sure the old phone’s Bluetooth is off or move far away from it.
Phone already connected to something else: If your Android is already connected to a car or a speaker, it may not show the earbuds in the scan. Disconnect other Bluetooth devices first.

Tips

Keep the case closed when not in use: The X08 earbuds turn off automatically when placed back in the case and the lid is closed. This preserves battery and prevents accidental reconnections.
Reset if you have trouble: If the earbuds don’t appear in the Bluetooth list, reset them: put both buds in the case, close the lid, wait 10 seconds, then take them out and try the pairing process again.
Use the touch controls: After pairing, you can tap the left or right bud to play/pause, double-tap to skip tracks, and hold to adjust volume. The exact gestures may vary slightly, so check your user manual.
Check battery level: Many Android phones show the battery level of connected Bluetooth devices in the Bluetooth settings or as a notification icon. Keep an eye on it to avoid mid-call shutdowns.

Troubleshooting

Earbuds don’t enter pairing mode. If holding the touch panel for 5 seconds doesn’t produce the red/blue flashing, try this: place both earbuds in the case, close the lid, wait 10 seconds, then take them out and immediately hold the touch panels again. If that fails, charge the case for 30 minutes and retry—low battery can prevent pairing mode.

Phone doesn’t find “X08” in the scan. Make sure the earbuds are in pairing mode (LED flashing) and that your phone’s Bluetooth is on. Move closer to the phone (within 3 feet) and away from other electronic devices that might cause interference. If the device list is long, tap “Refresh” or turn Bluetooth off and on again.

Connection drops repeatedly. This usually happens when the earbuds are paired to two devices at once (like your phone and a smartwatch). Unpair them from all devices, then pair only to your Android. Also, keep the phone in your pocket or within 30 feet—Bluetooth range is limited.

Only one earbud plays sound. First, check that both buds are in your ears and the volume is up. If only the right one works, the left may have a low battery. Place both in the case and charge for 15 minutes. If the issue persists, reset the earbuds (as described in Tips) and pair again.

Earbuds connect but no sound. Check your phone’s media volume (press the volume up button) and make sure the audio is not paused. Also, check that the earbuds are not set to “phone call” mode only—some apps route audio differently. Try playing from a different app to see if it’s app-specific.

Frequently Asked Questions

How do I reset my X08 earbuds?

Place both earbuds in the charging case, close the lid, wait 10 seconds, then take them out and hold the touch panels for 10 seconds until the LED flashes red three times. This clears the pairing history.

Can I pair X08 earbuds to two phones at once?

No, the X08 does not support multipoint connection. It can only be connected to one device at a time. To switch devices, unpair from the current phone and pair with the new one.

Why does my X08 only show as “X08-L” or “X08-R”?

This happens when the earbuds have been paired individually, usually after a reset or a firmware glitch. Put both buds back in the case, close the lid, wait 10 seconds, then take them out together—they should sync and appear as a single “X08” device.

How long do the X08 earbuds take to charge?

Typically, the earbuds take about 1–2 hours to fully charge in the case. The case itself takes about 2 hours via USB-C. The LED indicator on the case shows charging status.

Can I use the X08 earbuds with a non-Android phone?

Yes, the X08 uses standard Bluetooth and will pair with iPhones, Windows laptops, and other Bluetooth-enabled devices using the same steps. The touch controls may vary slightly, but the pairing process is identical.

What do I do if the earbuds keep disconnecting from my Android?

First, forget the device in your Bluetooth settings and pair again. If that doesn’t help, reset the earbuds and re-pair. Also, make sure your Android’s Bluetooth is not being shared with other devices, and keep the phone close.

Sources: Google Android Help. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.