AjapaReporter

Home life · Updated

How to Shrink an Essentials Hoodie

Time it takes45 min
Steps5in the list below
LevelEasyno special skills
Official sourceFear of God Essentials care instructionscheck it for changes

Quick answer Shrink an Essentials hoodie by washing it in hot water and drying it on high heat. The process works best on 100% cotton or cotton-heavy blends, and it can reduce the size by about one full garment size.

Essentials hoodies (the Fear of God basics line) are known for their oversized, boxy fit. If yours feels too baggy, or you bought a size up and want it closer to your true size, shrinking is a practical fix. The method below uses heat and agitation to tighten the cotton fibers. It works on cotton and cotton-polyester blends, though pure cotton shrinks the most. Check the care tag first: if the hoodie is mostly polyester or has a special finish (like a brushed fleece or printed graphic), shrinking may cause damage or uneven results.

What You’ll Need

  • Washing machine (top-load or front-load)
  • Hot water setting
  • Laundry detergent (regular amount)
  • Clothes dryer (or a flat surface and a hairdryer as backup)
  • Optional: a measuring tape to track the shrink

Step-by-Step

  1. Check the fabric label. Look at the tag inside the hoodie. If it says 100% cotton, you can expect significant shrinkage. If it says cotton-polyester blend (like 80/20 or 60/40), it will shrink less. If it says 100% polyester or has a “dry clean only” tag, stop here—heat will likely ruin the fabric.
  2. Turn the hoodie inside out. This protects the outer print or embroidery from rubbing against the drum. If the hoodie has a large graphic on the back, turning it inside out also reduces the chance of the design cracking or peeling during the hot wash.
  3. Wash in hot water. Set your washing machine to the hottest water setting available (usually labeled “Hot” or “Sanitize”). Add your normal detergent. Use a regular or heavy-duty cycle, not a delicate cycle. The combination of hot water and agitation is what causes the cotton fibers to contract.
  4. Dry on high heat. Immediately transfer the wet hoodie to the dryer. Set it to the highest heat setting (usually “High” or “Heavy Duty”). Let it run for a full cycle—about 40 to 60 minutes. The dryer’s heat is the most powerful shrinking force, so do not skip this step.
  5. Check the fit and repeat if needed. After the dryer cycle, take the hoodie out and try it on. If it’s still too big, repeat steps 2–4 once more. Most cotton hoodies shrink the most on the first wash, then much less on subsequent washes. If it fits, hang it to air dry from now on to keep it at that size.

Common Mistakes

  • Using cold or warm water. Cold water will not shrink cotton. Warm water may cause minor shrinkage, but hot water is required for a noticeable change.
  • Air drying after the hot wash. If you wash in hot water but hang the hoodie to dry, you lose most of the shrinking effect. The dryer’s heat is what locks in the size reduction.
  • Shrinking a hoodie with a large print. High heat can cause screen-printed graphics to crack, peel, or stick to themselves. If your hoodie has a large back print, consider shrinking it only in the wash (hot water) and then air drying, accepting less shrinkage, or skip the process.
  • Over-shrinking. You cannot un-shrink a hoodie. If you only need it slightly smaller, start with a warm wash and medium heat, then check the fit before going hotter.
  • Forgetting the drawstrings. The hood drawstrings may shrink at a different rate than the body, causing them to pucker or become uneven. Remove them before washing if they are detachable, or tie them loosely so they don’t get tangled.

Tips

  • Measure before you start. Lay the hoodie flat and measure the chest width and sleeve length. After the first dry cycle, measure again to see exactly how much it shrank. This helps you decide if a second round is worth it.
  • Shrink the body but not the sleeves. If the body is too big but the sleeves are fine, you can shrink just the body by washing in hot water, then drying the hoodie with the sleeves folded up and pinned inside the body. This is fiddly but works.
  • Use a gentle detergent. Harsh detergents with bleach or brighteners can weaken the fabric during a hot wash. Stick to a standard liquid or powder detergent.
  • Dry with towels. Adding a couple of dry towels to the dryer with the wet hoodie helps distribute heat and reduces the chance of the hoodie clumping into a ball.
  • Expect uneven shrinkage. Cotton shrinks more along the length than the width. Your hoodie may get noticeably shorter but only slightly narrower. This is normal.

Troubleshooting

  • The hoodie didn’t shrink at all. This likely means the fabric is a high-polyester blend or has been pre-shrunk (treated to resist shrinking). Check the tag again. If it’s mostly polyester, no amount of heat will shrink it. If it’s cotton but didn’t shrink, your washer may not be heating the water enough—try the “Sanitize” or “Booster” cycle if available.
  • The hoodie shrank too much. Unfortunately, you cannot stretch cotton back to its original size. You can try soaking it in lukewarm water with a little hair conditioner, then gently pulling it while it’s wet, but results are limited. For future attempts, use a cooler wash and shorter dryer time.
  • The graphic cracked or peeled. This happens when heat is too high for the print. There is no fix for cracked prints. If the hoodie is still wearable, you can cover the damaged area with a patch or embroidery. For future washes, always turn it inside out and use low heat.
  • The hoodie smells burnt or has a scorch mark. This can happen if the dryer was overloaded or the hoodie was pressed against the heating element. Remove it immediately, check for damage, and wash it again in cold water with a cup of white vinegar to remove the smell. If the fabric is melted, the hoodie is beyond repair.
  • The drawstrings came out. After washing, the drawstrings may have pulled out of the hood. Use a safety pin to thread them back through the channel. To avoid this next time, tie the drawstrings in a loose knot before washing.

Frequently Asked Questions

Will shrinking my Essentials hoodie ruin the oversized fit?

Yes, it will reduce the oversized look. The hoodie will become closer to a regular fit, but it will still have a slightly boxy cut. If you want to keep the oversized style but make it smaller, shrink only slightly (warm wash, medium dry) and check the fit.

Can I shrink a hoodie that is 50% cotton and 50% polyester?

Yes, but only about half as much as a 100% cotton hoodie. The cotton fibers shrink, but the polyester fibers do not, so the overall shrinkage is limited. Expect a modest reduction, not a full size.

How many sizes can I shrink an Essentials hoodie?

Typically, you can shrink it by about one full size, sometimes a bit more if it’s 100% cotton and you repeat the process. Shrinking more than one size usually distorts the shape and makes the hoodie look misshapen.

Will the hoodie shrink in the length or the width more?

Most cotton hoodies shrink more in length (the torso gets shorter) than in width. The sleeves also shrink in length. The chest width may only reduce by an inch or two, while the length can reduce by several inches.

Can I shrink only the sleeves?

Yes, you can. Wash the hoodie in hot water, then before drying, fold the sleeves up so the cuffs are tucked into the body. Pin them in place with safety pins, then dry on high heat. The body will stay mostly the same, but the sleeves will shrink more.

What if my hoodie has a hoodie string—should I remove it?

Yes, if possible. The string may shrink at a different rate and become uneven. If it’s not removable, tie it loosely and check it after drying. You can also replace the string with a new one if it gets damaged.

Sources: Fear of God Essentials care instructions. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.