Home life · Updated
How to Stretch in AutoCAD: Step-by-Step Guide
Quick answer The STRETCH command in AutoCAD moves objects while keeping their connections to other geometry intact. You select the parts you want to move with a crossing window, then drag or type a distance.
What You’ll Need
- AutoCAD (any recent version) with a drawing open
- An object or set of objects you want to stretch (lines, polylines, walls, doors, etc.)
- Basic knowledge of selecting objects and using the command line
Step-by-Step
- Start the STRETCH command. Type
STRETCH(orS) in the command line and press Enter. You can also find it in the Modify panel on the Home tab. - Select objects with a crossing window. When prompted, click the first corner of a crossing selection window, then click the opposite corner. The window must be drawn from right to left (green dashed box) to select objects. Only objects that are partially inside the window will be stretched; objects fully inside will be moved.
- Specify the base point. After selecting, press Enter. Then click a base point on or near the objects you want to stretch. This is the reference point for the movement.
- Specify the displacement. You can either click a second point to define the distance and direction, or type a relative coordinate like
@5,0to move 5 units to the right. Press Enter to finish. - Check the result. The selected endpoints and vertices will move, while lines that were fully inside the window will move without changing length. Objects not touched by the window stay put.
- Use grips for a quick stretch (alternative). Select an object, click a grip (the blue squares), and then drag it to a new location. This works for simple edits but does not affect connected objects.
- Combine with other commands. For complex edits, you can use STRETCH repeatedly or combine it with EXTEND, TRIM, or MOVE to refine the geometry.
Common Mistakes
- Using a window from left to right. A left-to-right window (blue) selects only objects fully inside, so nothing gets stretched. Always use a crossing window (right-to-left).
- Selecting the entire object. If you select the whole object with a crossing window, it will move instead of stretch. You need to select only the parts you want to change.
- Forgetting to press Enter after selection. The command waits for you to confirm the selection set before proceeding to the base point.
- Stretching a closed polyline. STRETCH on a closed polyline may not work as expected; you may need to explode it or use grips.
Tips
- Use object snaps (OSNAP) to pick precise base points and displacement endpoints.
- Turn on Ortho mode (F8) to stretch horizontally or vertically in straight lines.
- Type a distance and direction after the base point, like
@10<90for 10 units upward. - If you need to stretch multiple objects at once, include them all in the crossing window.
- For dynamic blocks, use the block's own stretch actions instead of the STRETCH command.
Troubleshooting
- Nothing happens after selecting. Make sure you used a crossing window (right-to-left). Try again with a fresh selection.
- The whole object moves instead of stretching. You likely selected the entire object. Undo (Ctrl+Z) and re-select only the part you want to stretch.
- Stretch is not available. Check that you are in a 2D drawing context and the command is not disabled by a customization. Type
STRETCHagain. - Lines break or disconnect. Stretching can break connections if you don't include the connecting endpoints. Use the EXTEND or FILLET commands to fix gaps.
- Stretching a hatch or dimension. Hatch patterns may not stretch automatically; you may need to re-associate them. Dimensions may update if they are associative.
Frequently Asked Questions
What is the difference between STRETCH and MOVE?
MOVE shifts the entire selected object to a new location without changing its shape or size. STRETCH moves only the parts of objects that are inside the crossing window, altering their length or shape while leaving the rest in place.
Can I stretch multiple objects at once?
Yes. Use a crossing window that includes parts of all the objects you want to stretch. They will all be affected together, maintaining their relative positions.
Why does my stretch go in the wrong direction?
The direction is determined by the displacement you specify. If you click a point, the stretch goes from the base point to that point. Use Ortho or type coordinates to control direction precisely.
Does STRETCH work on 3D objects?
STRETCH works on 2D objects and on the 2D faces of 3D solids, but it does not stretch 3D solids as a whole. For 3D edits, use the 3D editing tools or modify the solid's grips.
How do I stretch a polyline without breaking it?
Select the polyline with a crossing window that includes only the vertices you want to move. The polyline will stretch as a single object, maintaining its continuity.
What if I want to stretch only a specific segment of a rectangle?
Use a crossing window that includes the two endpoints of the segment you want to move. The rectangle will become a quadrilateral with the selected segment moved.
Related
- How to Stretch Between Shoulder Blades
- How to Stretch Before Walking: A Simple Guide
- How to Stretch Before Running: 7 Easy Moves
Sources: Autodesk. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.