Home life · Updated
How to Stretch Objects in AutoCAD: Full Guide
Quick answer The STRETCH command in AutoCAD moves selected parts of an object while keeping the rest fixed, letting you lengthen, shorten, or reshape lines, polylines, blocks, and more. You select the parts to move with a crossing window, then drag or type a distance.
What You’ll Need
- AutoCAD (any recent version; the command works the same in LT and full versions)
- A drawing with lines, polylines, rectangles, or blocks you want to reshape
- Basic understanding of object selection (clicking and window selection)
Step-by-Step
- Start the STRETCH command. Type
STRETCH(or justS) on the command line and press Enter. Alternatively, click the Stretch icon on the Home tab > Modify panel. The command line will prompt: “Select objects to stretch by crossing-window or crossing-polygon…” - Select with a crossing window. This is the crucial part: you must select the objects using a crossing window (drag from right to left) or a crossing polygon (type
CPafter the prompt). A crossing window selects everything it touches, including objects only partially inside. If you use a regular window (left to right), you’ll only select fully enclosed objects, and stretch won’t work as expected. Drag from the bottom-right to the top-left (or any right-to-left direction) to create the dashed green selection box. - Choose exactly what to move. Only the endpoints and vertices that fall inside the crossing window will move. Any part of an object outside the window stays fixed. For example, to stretch a rectangle’s right edge, put the crossing window over the right half of the rectangle—include the right vertical line and the two right corners, but leave the left vertical line outside. Press Enter when done selecting.
- Specify the base point. The command line will now prompt: “Specify base point or [Displacement].” Click any point on or near the objects you’re moving. This is the reference point for the stretch. It doesn’t have to be on the object—anywhere in the drawing works.
- Specify the second point or distance. After picking the base point, you can either click a new location (the stretch will move the selected vertices by the same distance and direction as your base point to the new point) or type a distance and press Enter. For precise horizontal stretching, turn on Ortho (F8) or type a distance like
50and press Enter, then press Enter again to accept the default direction (or use the mouse to set direction first). - Check the result. The selected vertices should have moved, and the objects connected to them should have stretched or compressed accordingly. Lines that were fully inside the window will move entirely; lines that were partially inside will have their inside endpoint moved and the line reconnected to the fixed part.
- Repeat or adjust as needed. If the result isn’t what you wanted, press
Ctrl+Zto undo and try again with a different selection window. You can also use theM(multiple) option within the command to stretch several separate groups in one go, though it’s often easier to do them one at a time.
Common Mistakes
- Using a regular window instead of a crossing window. This is the #1 error. If you drag left-to-right, you’ll only select fully enclosed objects, and the stretch will either do nothing or move the entire object. Always drag right-to-left.
- Selecting the whole object. If your crossing window covers the entire object, the whole thing moves—it won’t stretch. You must leave part of the object outside the selection.
- Forgetting to press Enter. After selecting, you must press Enter to finish the selection set. If you don’t, the command stays in “select objects” mode.
- Using STRETCH on a block that isn’t dynamic. Regular blocks don’t stretch well—they move as a whole or not at all. Use dynamic blocks with stretch actions, or explode the block first (though that loses its block properties).
- Confusing STRETCH with EXTEND or LENGTHEN. EXTEND extends lines to meet another object; LENGTHEN changes total length. STRETCH moves vertices—it can lengthen, shorten, or completely reshape.
Tips
- Use Ortho (F8) for straight stretches. With Ortho on, you can only move the mouse horizontally or vertically, making it easy to stretch exactly along an axis.
- Type exact distances. After picking a base point, type a number and press Enter. If you want to stretch 25 units to the right, type
25and press Enter, then press Enter again (or click to the right) to set the direction. - Use object snaps for precision. While picking the base point or second point, hold Shift and right-click to bring up the object snap menu, or use
END(endpoint),MID(midpoint), orINT(intersection) to snap to existing geometry. - Stretch multiple objects at once. You can select several lines, arcs, and polylines in the same crossing window and stretch them all together—useful for moving a wall or a row of elements.
- For arcs, stretch the endpoints. Arcs have endpoints and a midpoint; stretching an endpoint changes the arc’s length and shape. The center and radius stay fixed unless you also select them.
- Use grips as an alternative. Select an object, then click a grip (the blue squares) and drag it. This is essentially a manual stretch and works well for simple edits, but STRETCH gives you more control over multiple objects.
Troubleshooting
- Nothing happens when I run STRETCH. You probably didn’t select any objects, or you used a regular window. Re-run the command and drag from right to left. Also check that the layer isn’t locked or frozen—locked layers can’t be selected.
- The whole object moves instead of stretching. Your crossing window covered the entire object. Redo the selection with the window only over the part you want to move. For a line, select just one endpoint; for a rectangle, select just one edge and its two corners.
- Only part of a polyline stretches. That’s normal—polylines stretch only the vertices inside the window. If you want the whole polyline to move, select the entire polyline. If you want to add a vertex, use the
PEDITcommand or the “Add Vertex” grip option. - STRETCH doesn’t work on a block. Standard blocks are treated as single objects—they either move entirely or not at all. To stretch a block, you need a dynamic block with a stretch action, or you can use
BEDIT(Block Editor) to add one. Alternatively, explode the block (typeX) and then stretch the resulting lines. - Text or dimensions don’t stretch properly. Text doesn’t have vertices—it moves as a whole if selected. Dimensions stretch if you select their definition points (the extension line origins). If you want text to move with a stretch, include it in the crossing window, but it will just relocate, not resize.
- I get “Point or option keyword required” error. This happens when you type an invalid distance or direction. Make sure you’re typing a number (like
50) or clicking a point. If you typed a direction word (like “right”), that won’t work—use the mouse with Ortho instead.
Frequently Asked Questions
What is the difference between STRETCH and EXTEND?
STRETCH moves selected vertices, which can lengthen, shorten, or reshape an object. EXTEND only lengthens a line or arc to meet another object’s boundary. STRETCH is more flexible—it can do both lengthening and shortening, and it can change angles.
Can I stretch a circle?
No, a circle has no vertices. If you include a circle in a crossing window, it will move as a whole, not stretch. To make an ellipse-like shape, draw an ellipse instead, or convert the circle to a polyline (using PEDIT with the “Fit” option) and then stretch the polyline’s vertices.
How do I stretch multiple objects in different directions?
You can’t do that in one command—STRETCH moves all selected vertices by the same displacement. For different directions, run the command separately for each group, or use the M (multiple) option, which lets you pick a new base point and displacement for each selection set within the same command session.
Why does my stretch only move the line, not the rectangle?
If the rectangle is a single polyline, you must select the vertices you want to move. If you selected only the line, the rectangle’s vertices aren’t in the selection set. Use a crossing window that includes the rectangle’s corners you want to move, or select the whole rectangle and then use grips to drag a corner.
Can I stretch an object by a specific angle?
Yes. After picking the base point, type @distance@50<30) and press Enter. This stretches the selected vertices 50 units at a 30-degree angle. Or use Polar Tracking (F10) and set the angle increment in the Drafting Settings.
Does STRETCH work on 3D objects?
Yes, but it works on the 2D projection of the current view. For 3D solids, STRETCH moves faces and edges, but it’s often easier to use SOLIDEDIT or grips. For 3D polylines, STRETCH works on vertices in 3D space.
Related
- How to Wash a Kathmandu Puffer Jacket
- How to Whiten Veneers: Safe Steps That Work
- How to Wash a K&N Air Filter: Step-by-Step Guide
Sources: Autodesk Support. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.