Home life · Updated
How to Turn On iPhone: Simple Steps
Quick answer Press and hold the side button (or top button on older models) until the Apple logo appears, then release. If the screen stays black, charge the phone first.
This guide covers every iPhone model, from the newest with Face ID to older ones with a Home button. Turning on an iPhone is usually a single button press, but the exact button depends on your model. If the phone is completely dead, you will need to charge it before it will power on. This article walks you through the process, what to check first, and what to do if the screen stays black.
What You’ll Need
- Your iPhone
- A Lightning or USB-C cable and a power adapter (only if the battery is completely drained)
- A computer or power outlet (only if charging is needed)
Step-by-Step
- Locate the correct button. On iPhone X and newer (including iPhone 11, 12, 13, 14, 15, and 16 series), the side button is on the right edge of the phone. On iPhone SE (2nd and 3rd generation) and iPhone 8 or earlier, the side button is also on the right. On older models like the iPhone 6, 7, or 8, the button is on the top right corner. On iPhone 5s and earlier, it is the top button.
- Press and hold the button. Press and hold the side or top button for about 2 to 3 seconds. Do not tap it; you need to hold it steadily. On models with Face ID, you do not need to press any other button. On models with a Home button, the Home button is not used for powering on.
- Watch for the Apple logo. While you are holding the button, the screen will first go black, then after a couple of seconds, the white Apple logo will appear on a black background. As soon as you see the logo, you can release the button. The phone is now booting up.
- Wait for the lock screen. After the logo appears, it can take anywhere from 10 seconds to a minute for the phone to finish starting up. You will know it is ready when you see the lock screen with the time and date, or the “Hello” screen if the phone is new or has been reset.
- Unlock or set up. If the phone was already set up, swipe up from the bottom (Face ID models) or press the Home button (older models) to reach the passcode screen. If it is a new phone, you will see the “Hello” screen and need to follow the on-screen setup steps.
Common Mistakes
- Holding the wrong button: On iPhones with Face ID, pressing the volume buttons or the Action button (on iPhone 15 Pro and newer) does nothing. Only the side button works for powering on.
- Tapping instead of holding: A quick tap will not turn on the phone. You must hold the button for at least 2 seconds until the Apple logo appears.
- Confusing the side button with the Action button: On iPhone 15 Pro and 16 Pro models, the Action button is on the left side above the volume buttons. It is not the power button.
- Thinking the phone is off when the screen is just asleep: If you press the side button once and the screen lights up with the lock screen, the phone was already on. You only need to press and hold to turn it on if it was completely powered off.
- Ignoring a dead battery: If the phone has been off for a long time or the battery is completely drained, it may not respond to the button press at all. It needs power first.
Tips
- Check the mute switch: If the phone turns on but you get no sound, make sure the small switch on the left side (above the volume buttons) is not showing orange. That means it is on silent.
- Use the AssistiveTouch shortcut: If the side button is broken, you can turn on the phone by connecting it to a charger. It will automatically power on when it receives power, even if the button is unresponsive.
- Force restart if frozen: If the phone is on but the screen is frozen and unresponsive, you do not need to turn it off and on. Instead, press and release Volume Up, press and release Volume Down, then press and hold the Side button until the Apple logo appears. This is a force restart and does not erase data.
- Keep it charged: To avoid a dead battery, try to charge your iPhone when it drops to around 20% rather than waiting for it to shut down completely.
Troubleshooting
Screen stays black after holding the button: This almost always means the battery is completely drained. Plug the phone into a charger using the original cable and adapter. Wait at least 5-10 minutes. Then, try holding the side button again. If the charging cable is worn or the adapter is not powerful enough, it may not charge. Try a different cable or plug it into a computer’s USB port (though this charges slower).
Apple logo appears but then the screen goes black again: This can happen if the battery is critically low. Leave it plugged in for at least 15 minutes without touching it. If it still loops, try a force restart (press Volume Up, then Volume Down, then hold the Side button).
Phone turns on but shows a “Connect to Computer” screen: This is recovery mode. It means the software is corrupted or the phone needs to be restored. You will need to connect it to a computer with Finder (on macOS Catalina or later) or iTunes (on Windows or older macOS) and follow the prompts to restore or update the phone.
Phone turns on but is very slow or unresponsive: This is not a power issue. Try a force restart. If that does not help, the storage may be full or the battery health may be degraded. Check Settings > General > iPhone Storage and Settings > Battery > Battery Health.
Button feels stuck or does not click: If the side button is physically stuck, you may need to have it serviced. In the meantime, you can enable AssistiveTouch (Settings > Accessibility > Touch > AssistiveTouch) to have a virtual power button on screen, or just plug in the charger to wake the phone.
Frequently Asked Questions
Why won’t my iPhone turn on even after charging?
If you have charged it for at least 15 minutes and it still does not turn on, the battery may be damaged, or the charging port may be blocked with lint. Try cleaning the port gently with a soft, dry toothbrush. If that fails, it may need a hardware repair.
Do I need to press the Home button to turn it on?
No. The Home button is only for unlocking or going to the home screen. The power button is always on the side or top, depending on the model.
How long does it take for an iPhone to turn on?
From a completely off state, it usually takes about 15 to 30 seconds to see the lock screen. If the phone was very low on battery, it may take a few minutes to boot up fully.
What is the difference between turning on and a force restart?
Turning on is for when the phone is completely off. A force restart is for when the phone is on but frozen or unresponsive. A force restart does not erase your data; it just reboots the system.
My iPhone is in a black screen but I can hear sounds or feel vibrations. What do I do?
This means the phone is on but the display is not working. Try a force restart first. If the screen still stays black, it is likely a hardware issue with the display, and you will need to contact Apple Support or an authorized service provider.
Can I turn on my iPhone without the side button?
Yes. Plug it into a power source. The iPhone will automatically turn on when it starts charging, even if the side button is broken. You can also use AssistiveTouch to lock the screen, but you still need the button to initially power on.
Related
Sources: Apple Support. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.