AjapaReporter

Home life · Updated

How to Wash Eric Emanuel Shorts: Care Guide

Time it takes30 min
Steps8in the list below
LevelEasyno special skills
Official sourceEric Emanuelcheck it for changes

Quick answer Wash Eric Emanuel shorts in cold water on a gentle cycle, inside out, and hang them to dry to protect the mesh and embroidery.

Eric Emanuel shorts are known for their bold colors, mesh fabric, and detailed embroidery. Proper washing keeps the colors bright, the mesh from snagging, and the logos intact. Before you start, check the care tag inside the waistband—it may have specific instructions for your particular pair. This guide works for the standard mesh basketball-style shorts, but always defer to the tag if it conflicts.

What You’ll Need

  • Mild liquid detergent (free of bleach and optical brighteners)
  • Mesh laundry bag (optional but recommended)
  • Cold water (below 30°C / 85°F)
  • Clean, dry towel for drying
  • Sink or basin (for hand washing)

Step-by-Step

  1. Turn the shorts inside out. This protects the outer mesh and any embroidery or logos from rubbing against other clothes and the drum of the washing machine.
  2. Zip or button any closures. If your shorts have a drawstring, tie it loosely so it doesn’t get caught. If there are zippers, close them to prevent snagging.
  3. Place in a mesh laundry bag. This adds an extra layer of protection, especially if you’re washing with other items. Skip this step if hand washing.
  4. Set the machine to a gentle cycle with cold water. Use the delicate or hand-wash cycle on your machine. Cold water prevents color bleeding and shrinking of the mesh.
  5. Add a small amount of mild detergent. Use about a tablespoon or the cap’s minimum line. Too much detergent leaves residue that dulls colors. Do not use fabric softener—it coats the mesh and reduces breathability.
  6. Wash with similar colors. Wash dark pairs together and light pairs together to avoid any dye transfer. Avoid washing with heavy items like jeans that can abrade the mesh.
  7. Remove promptly after the cycle ends. Leaving wet shorts in the machine can cause colors to bleed or mildew to form. Take them out right away.
  8. Air dry flat or hang. Lay the shorts flat on a clean towel or hang them by the waistband in a shaded area. Do not use a dryer—high heat will shrink the mesh and warp the embroidery. Reshape gently while damp.

Common Mistakes

  • Using hot water. Hot water shrinks the polyester mesh and can cause colors to bleed, especially on vibrant pairs.
  • Machine drying. The dryer’s heat is the fastest way to ruin the fit and the embroidery. Always air dry.
  • Washing with heavy items. Denim or towels can rub against the mesh and cause pilling or snags.
  • Using bleach or stain removers with chlorine. These will discolor the mesh and damage the thread used for embroidery.
  • Scrubbing stains aggressively. Rubbing hard on a stain can distort the mesh weave. Blot instead.

Tips

  • For hand washing, fill a sink with cold water, add a drop of mild detergent, and gently squeeze the shorts for a few minutes. Rinse thoroughly until the water runs clear.
  • To remove a stain, dab a small amount of liquid detergent directly on the spot and let it sit for 5 minutes before washing. Never rub.
  • Wash new pairs separately for the first two washes to catch any excess dye.
  • Store shorts folded, not hung by the waistband, to prevent stretching the elastic.
  • If the drawstring gets tangled, pull it out before washing and re-thread it after drying.

Troubleshooting

  • Colors bled onto the mesh. If you see dye transfer, rewash immediately with a color-catcher sheet in cold water. Do not dry until the stain is gone, as heat sets it.
  • Shorts came out wrinkled. Gently stretch the fabric back to shape while damp and lay flat to dry. Do not iron directly on the mesh—use a low-heat iron with a cloth barrier if absolutely needed.
  • Embroidery is pulling or loose. Turn the shorts inside out and use a needle to carefully push the loose thread back through to the inside. Do not cut it, as that can unravel the design.
  • Shorts smell musty after drying. They likely dried too slowly in a humid area. Rewash with a cup of white vinegar in the rinse cycle (no detergent) and dry in a well-ventilated space.
  • White mesh turned yellow. This is often from detergent residue or prolonged sun exposure. Soak in a solution of oxygen-based bleach (like OxiClean) and cold water for 30 minutes, then rinse thoroughly.

Frequently Asked Questions

Can I put Eric Emanuel shorts in the dryer?

No. The heat will shrink the mesh and damage the embroidery. Always air dry flat or hang.

Should I wash them inside out?

Yes, always turn them inside out before washing to protect the outer mesh and any printed or embroidered details.

Can I use fabric softener?

Avoid it. Fabric softener coats the mesh fibers, reducing breathability and leaving a residue that dulls colors.

How often should I wash them?

Wash after every few wears if they’re not visibly dirty or smelly. Over-washing fades colors faster. Spot clean small stains instead.

Is it safe to wash them with other clothes?

Yes, but only with similar colors and lightweight items. Avoid heavy fabrics like denim that can cause friction damage.

Can I iron the shorts?

Ironing directly on mesh can melt it. If you must remove wrinkles, use a low-heat setting with a pressing cloth, or steam them while hanging.

Sources: Eric Emanuel. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.