AjapaReporter

Home life · Updated

How to Descale DeLonghi Coffee Machine

Time it takes30 min
Steps8in the list below
LevelEasyno special skills
Official sourceDeLonghicheck it for changes

Quick answer Descaling removes limescale buildup that affects taste and performance. Use DeLonghi EcoDecalk or a citric acid solution; run the descaling cycle, then rinse thoroughly.

Limescale from hard water builds up inside your DeLonghi coffee machine over time, blocking pipes and affecting the taste of your coffee. Descaling every 2–3 months (or when the descale light appears) keeps the machine running smoothly. Always follow your model’s manual, but the general process is similar across most DeLonghi machines.

What You’ll Need

  • DeLonghi EcoDecalk descaler (or a food-grade citric acid solution – check your manual for the correct ratio)
  • Fresh water
  • Empty container or large jug (at least 1 liter capacity)
  • Access to the water tank and drip tray

Step-by-Step

  1. Prepare the machine: Turn off the machine and unplug it. Remove the water tank, empty any remaining water, and rinse it out.
  2. Add the descaler: Pour the recommended amount of DeLonghi descaler into the water tank, then fill with fresh water up to the MAX line. If using citric acid, follow the instructions on the packet – typically about 30g per liter of water.
  3. Place a container: Put a large empty container under the steam wand (if your machine has one) and another under the coffee spout to catch the liquid.
  4. Start the descaling cycle: Plug in the machine and turn it on. Press and hold the descale button (often indicated by a coffee cup with a drop icon) for a few seconds until the descale indicator lights up. The cycle will begin automatically.
  5. Let the cycle run: The machine will alternate between dispensing hot water from the spout and steam from the wand, in intervals. Let it run until the water tank is empty. This usually takes about 20–25 minutes.
  6. Rinse the tank: Once the descaling solution is used up, the machine will stop. Turn it off, remove the water tank, and rinse it thoroughly with fresh water.
  7. Run a rinse cycle: Fill the water tank with fresh water only, place the container back under the spout, and turn the machine on. Run a coffee brewing cycle (without coffee) to flush out any remaining descaler. Repeat if necessary until the water tastes neutral.
  8. Clean up: Empty and rinse the drip tray and any containers used. Wipe down the machine exterior. The descale light should go off automatically after the rinse cycle.

Common Mistakes

  • Skipping the rinse: Not running enough fresh water cycles can leave descaler residue, which tastes bitter and can foam excessively.
  • Using too much descaler: Over-concentrated solutions can damage internal parts. Always follow the manufacturer’s ratio.
  • Forgetting the steam wand: If your machine has a steam wand, it needs to be flushed during descaling to clear limescale from that line too.
  • Ignoring the descale light: Waiting too long can cause permanent damage and requires more frequent descaling later.

Tips

  • Use filtered or bottled water to reduce limescale buildup, so you don’t have to descale as often.
  • If your model doesn’t have a descale cycle, manually run a mixture of water and descaler through the brew group and steam wand, then rinse thoroughly.
  • Check your manual for the specific descale button – on some models it’s a dedicated button, on others you hold the power button.

Troubleshooting

Machine stops mid-cycle: This is normal – the machine pauses to let the solution soak. Wait for it to continue; if it doesn’t, check that the water tank is seated properly.

Descale light stays on after rinsing: Some models require you to turn the machine off and on again, or press the descale button again to reset the indicator. If it persists, repeat the rinse cycle once more.

Machine makes loud noises during descaling: This is usually just the pump working harder to push the solution through. If it continues after the cycle, run a few more rinses.

Water not flowing: If the machine doesn’t dispense water, check that the water tank is full and properly inserted. If the issue remains, the descaling might not have cleared a severe blockage – repeat the descaling process.

Frequently Asked Questions

How often should I descale my DeLonghi coffee machine?

Every 2–3 months, or when the descale indicator lights up. If you use very hard water, you may need to do it more frequently.

Can I use vinegar instead of descaler?

Vinegar is not recommended because it can leave a strong odor and may damage internal seals. Use a commercial descaler like DeLonghi EcoDecalk for best results.

What if I don’t have a descale button?

Some models require you to manually run a mixture of water and descaler through the coffee spout and steam wand. Check your manual for the exact procedure.

Do I need to remove the water filter before descaling?

Yes, remove the water softener filter (if present) before adding descaler, as the descaler can damage it. Replace the filter after descaling.

Can I use a generic descaler?

Yes, but make sure it’s suitable for coffee machines. Avoid descalers designed for kettles or irons, as they may contain additives.

Why is my coffee bitter after descaling?

This usually means there is still descaler residue. Run additional rinse cycles with fresh water until the water runs clear and tastes neutral.

Sources: DeLonghi. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.