Home life · Updated
How to Descale DeLonghi La Specialista
Quick answer Descaling your DeLonghi La Specialista removes limescale buildup that clogs the boiler and affects coffee temperature and steam pressure. Run the machine's built-in descaling cycle with DeLonghi EcoDecalk solution, then rinse thoroughly.
What You’ll Need
- DeLonghi EcoDecalk descaler (or a citric acid–based descaler recommended by DeLonghi)
- Fresh water
- Empty container or bowl (at least 1.5 L capacity) to collect the descaling solution
- Access to the water tank and the steam wand
- A soft cloth for wiping spills
Before You Start
Turn the machine off and unplug it for safety. Remove the water tank and empty any remaining water. Also remove the drip tray and the grid, and clean them separately with warm soapy water—this prevents old coffee residue from mixing with the descaler. Make sure the machine is cool before you begin.
Step-by-Step
- Prepare the machine: Plug in the machine, switch it on, and ensure the water tank is in place. Place the empty container under the steam wand and also under the hot water spout (if your model has one) to catch the solution.
- Enter descaling mode: With the machine on, press and hold the descaling button (often marked with a droplet or “DESCALE” icon) for about 10 seconds until the indicator lights start flashing. The exact button may vary by model—check your manual if unsure.
- Add the descaler: Pour the entire bottle of DeLonghi EcoDecalk into the water tank, then fill the tank with fresh water up to the MAX line. Do not exceed the MAX line.
- Start the descaling cycle: Press the descaling button again to start the cycle. The machine will pump the solution through the internal circuits and out of the steam wand and hot water spout. Let the machine run until it stops automatically—this can take 20–30 minutes.
- Rinse the water tank: When the descaling cycle finishes, empty the water tank, rinse it thoroughly with fresh water, and refill it to the MAX line with clean water only.
- Run a rinse cycle: Press the descaling button again to run a rinse cycle. The machine will pump clean water through the system. Let it run until the tank is empty.
- Repeat the rinse: For best results, repeat the rinse cycle one more time with fresh water to ensure no descaler residue remains.
- Clean the steam wand: After rinsing, wipe the steam wand with a damp cloth and purge it briefly by turning the steam dial on for a few seconds. This clears any remaining solution from the wand.
- Reset and reassemble: Once the cycles are complete, the machine will exit descaling mode automatically. Reinstall the drip tray and grid, and run a quick shot of hot water through the group head to confirm everything is clear.
Common Mistakes
- Skipping the rinse: Leaving descaler in the system can make your coffee taste bitter or metallic. Always run at least one full rinse cycle, preferably two.
- Using the wrong descaler: Vinegar or other household acids can damage the internal seals and heating element. Stick to DeLonghi’s recommended descaler.
- Not emptying the drip tray: The drip tray will fill with descaling solution during the cycle. If it overflows, it can damage the machine’s electronics.
- Interrupting the cycle: Do not turn off the machine or unplug it during descaling. This can leave the descaler partially through the system and cause blockages.
- Forgetting the steam wand: The steam wand is part of the descaling path. If you don’t place a container under it, you’ll have a mess and may not clear the wand properly.
Tips
- Descale every 2–3 months, or more often if you have hard water. The machine may also prompt you with a descaling light.
- Use filtered or bottled water to reduce mineral buildup and extend the time between descaling.
- Keep the water tank filled with fresh water when not in use—stale water can cause scale to form faster.
- After descaling, run a blank shot (no coffee) through the group head to flush any remaining solution from the brew unit.
- Clean the steam wand daily after use by wiping it with a damp cloth and purging steam for a few seconds.
Troubleshooting
- Machine doesn’t enter descaling mode: Ensure the machine is on and the water tank is seated properly. Check your manual for the exact button combination—some models require pressing the power button and the descaling button simultaneously.
- Descaling cycle stops midway: The machine may pause if the water tank runs dry. Refill the tank with fresh water and press the descaling button again to resume.
- Water leaks during descaling: Check that the water tank is firmly seated and the drip tray is empty. Also ensure the steam wand is fully open and pointing into the container.
- Machine still shows descaling light after the cycle: Some models require you to reset the descaling counter. Press and hold the descaling button for a few seconds until the light turns off.
- Coffee tastes odd after descaling: Run an additional rinse cycle with fresh water, and then brew a few shots of coffee and discard them to clear the lines completely.
Frequently Asked Questions
How often should I descale my DeLonghi La Specialista?
DeLonghi recommends descaling every 2–3 months, but the frequency depends on your water hardness. If you notice slower brewing, louder pump noises, or weak steam, it’s time to descale.
Can I use vinegar instead of the DeLonghi descaler?
No. Vinegar is acidic and can damage the machine’s internal rubber seals and heating element. Use only the recommended DeLonghi EcoDecalk or a citric acid–based descaler specifically designed for espresso machines.
How long does the descaling process take?
The full cycle, including rinses, takes about 30–40 minutes. The actual descaling phase is around 20–30 minutes, plus two rinse cycles of about 5 minutes each.
Do I need to remove the water filter before descaling?
Yes, if your machine has a water filter, remove it before starting the descaling cycle. The descaler can damage the filter, and the filter may block the flow of the solution. Reinstall a fresh filter after descaling.
What if I don’t have the original DeLonghi descaler?
You can use a generic citric acid–based descaler, but make sure it’s safe for espresso machines. Avoid any descaler with harsh chemicals or strong acids. Always follow the manufacturer’s instructions for dilution.
Can I descale with the steam wand closed?
No. The steam wand must be open during the descaling cycle, as the solution needs to flow through it to clear scale from the steam circuit. Keep the wand directed into the container.
Related
- How to Descale DeLonghi Coffee Machine
- How to Write an Invoice for Payment
- How to Phone Germany from Canada
Sources: DeLonghi Support. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.