AjapaReporter

Home life · Updated

How to Descale a Jura Coffee Machine

Time it takes30 min
Steps10in the list below
LevelEasyno special skills
Official sourceJuracheck it for changes

Quick answer Descaling removes limescale buildup inside your Jura machine, keeping it brewing at the right temperature and pressure. You'll need Jura descaling tablets and about 30 minutes.

What You’ll Need

  • Jura descaling tablets (use only genuine Jura tablets; other brands can damage the machine)
  • Empty container with a capacity of at least 1 liter (or 2 liters for larger models)
  • Access to the water tank and the drip tray
  • Clean, dry cloth for wiping up spills

Step-by-Step

  1. Prepare the machine: Turn off your Jura and unplug it. Remove the water tank and empty it completely. Also remove the drip tray and coffee grounds container, empty and clean them, then put them back in place.
  2. Add the descaling tablet: Place one Jura descaling tablet into the empty water tank. Do not add water yet.
  3. Refill the water tank: Fill the water tank with fresh, cold tap water up to the MAX mark. Put the tank back onto the machine.
  4. Enter descaling mode: Plug the machine back in and turn it on. Wait until it is ready. Press and hold the program button (the one with the coffee cup icon) for about 3 seconds until the descaling symbol appears on the display. The exact button may vary slightly by model, so check your manual if needed.
  5. Confirm the process: The display will ask you to confirm descaling. Press the button indicated (usually the same program button or a checkmark) to start. The machine will begin dispensing the descaling solution in intervals.
  6. Place the container: Put your empty container under the dual spout (coffee and hot water outlet). Make sure it is large enough to hold all the liquid that will come out.
  7. Let the descaling run: The machine will automatically dispense the solution, pause, and repeat. This takes about 10-15 minutes. Do not interrupt the cycle. When the water tank is empty, the machine will beep and ask for a rinse.
  8. Rinse the water tank: Empty the container, then remove the water tank and rinse it thoroughly with fresh water. Fill it with clean water and put it back.
  9. Run the rinse cycle: The machine will now run a rinse cycle to flush out any remaining descaling solution. Let it complete. The rinse may take a few minutes and will use the entire water tank.
  10. Finish and clean up: When the rinse is complete, the machine will return to ready mode. Empty the container, wipe any spills, and you’re done. Your Jura is now descaled and ready to brew.

Common Mistakes

  • Using the wrong tablets: Non-Jura tablets or liquid descalers can damage the internal components and void your warranty. Always use genuine Jura descaling tablets.
  • Skipping the rinse: If you don’t run the rinse cycle properly, descaling solution remains in the system, which can make your coffee taste bitter or metallic.
  • Interrupting the cycle: Stopping the descaling process midway can leave solution trapped in the lines. Let it run to completion.
  • Not emptying the drip tray: The drip tray will fill during descaling. If it overflows, you’ll have a mess. Empty it beforehand and check it during the process.
  • Using too much descaling solution: One tablet per cycle is correct. Adding more can cause foaming and overflow.

Tips

  • Descale regularly: The frequency depends on water hardness and usage. A good rule is every 2-3 months, or when the machine prompts you.
  • Check your water hardness: Jura machines have a water hardness setting. Set it correctly (using the test strip that came with the machine) so the machine knows when to remind you to descale.
  • Use filtered water: Using filtered water reduces limescale buildup, meaning you need to descale less often.
  • Do it when you have time: The process takes about 30 minutes and requires attention, so pick a time when you won’t be rushed.
  • Keep the manual handy: Different Jura models have slightly different button sequences. Your manual is the best reference.

Troubleshooting

  • Machine doesn’t enter descaling mode: Make sure the machine is on and ready. If the button doesn’t work, check the manual for your model—some require holding a different button or navigating the menu.
  • Descaling solution not flowing: Check that the water tank is properly seated and the valve is open. Also ensure the drip tray and grounds container are correctly inserted.
  • Machine beeps mid-cycle: This usually means the water tank is empty or the container is full. Empty the container, refill the tank with fresh water, and continue if the machine allows, or restart the cycle.
  • Error message after descaling: If you see an error like “Descaling incomplete,” repeat the entire process. Make sure you used the correct amount of tablet and water.
  • Machine still shows descale reminder: After a successful descale, the reminder should reset. If it doesn’t, try turning the machine off and on again, or consult the manual for a manual reset.

Frequently Asked Questions

How often should I descale my Jura?

It depends on water hardness and usage. The machine will alert you when descaling is needed. On average, every 2-3 months is typical.

Can I use vinegar or citric acid instead of Jura tablets?

No. Vinegar and citric acid can damage the internal parts of your Jura and may leave residues. Only use genuine Jura descaling tablets.

What happens if I don’t descale my Jura?

Limescale builds up, leading to slower brewing, weaker coffee, and eventually clogs or damage to the heating element. Regular descaling extends the life of your machine.

Can I descale my Jura while it’s still under warranty?

Yes, descaling is a normal maintenance task. Using genuine Jura tablets and following the instructions will not void your warranty.

Why does my coffee taste bad after descaling?

This usually means the rinse cycle wasn’t completed properly. Run an extra rinse cycle with fresh water to flush out any remaining solution.

Do I need to remove the milk system before descaling?

No, but you should run the milk cleaning cycle separately if your machine has one. Descaling only targets the coffee and water system.

Sources: Jura. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.