Home life · Updated
How to Get Rid of a Small Amount of Black Mold
Quick answer For a small patch on a hard, nonporous surface, wear protective gear, clean it with detergent and water, then dry the area completely. Fix the moisture source; do not disturb large, recurring, or hidden mold.
“Black mold” describes a color, not a reliable identification of a particular mold species. You usually do not need to identify the type to deal with a small patch. The key is to clean it safely, dry the surface, and stop the dampness that allowed it to grow.
This guide is for a small area on a sound, washable surface such as tile, glass, or sealed metal. If the mold covers a large area, keeps returning, is inside a wall or ventilation system, or is on a material that cannot be cleaned and dried properly, do not tackle it as a simple household job. Avoid disturbing it and seek qualified help. People with asthma, mold allergies, immune conditions, or other health concerns should avoid cleanup and ask a health professional for advice.
What You’ll Need
- Rubber or other waterproof gloves
- Safety goggles
- A well-fitting N95 respirator
- Dish detergent or household detergent and clean water
- A bucket, disposable cloths or paper towels, and a soft brush
- A sealable bag for used cleaning materials
- A fan or dehumidifier, if needed to dry the area
Step-by-Step
- Check the size and surface. Look at the full affected area without scraping or brushing it. This method is for a small patch on a hard, nonporous surface. If the affected area is roughly 10 square feet (about 0.9 square metres) or larger, involves porous materials such as drywall, ceiling tiles, carpet, or insulation, or appears to extend behind a surface, stop and arrange an appropriate assessment or professional cleanup.
- Stop the moisture source. Repair or report leaks, reduce condensation, and improve ventilation where practical. Do not clean while water is still entering or pooling. If the source is not obvious or the area stays damp, address that problem before expecting the mold to stay gone.
- Prepare the area and protect yourself. Keep children and pets away. Open a window or otherwise ventilate the room if this can be done without spreading dust through the building. Put on gloves, goggles, and a well-fitting N95 respirator. Do not use a fan that blows directly across the patch, because it can spread particles.
- Wash the surface gently. Mix detergent with water according to its label. Wipe the patch with a damp cloth or gently scrub it with a soft brush. Work carefully and avoid dry brushing, sanding, scraping, or using a high-pressure spray. Do not soak nearby porous materials.
- Remove residue and dry thoroughly. Wipe away loosened material and detergent with a clean damp cloth, then dry the surface with a fresh cloth. Bag used disposable cloths and other cleanup waste. Leave the area open to air and use a dehumidifier or indirect airflow if needed; make sure the surface and nearby area are fully dry.
- Check the result and monitor it. When the surface is dry, inspect it for remaining growth, water damage, or a continuing leak. Keep the area dry and check it periodically. If mold returns, spreads, or seems to come from behind the surface, stop repeating surface cleaning and investigate the moisture or hidden damage.
Common Mistakes
- Using bleach as the default fix: Scrubbing with detergent and water is generally the practical choice for a small patch on a hard surface. Bleach may not solve the moisture problem and is not suitable for every material.
- Mixing cleaning products: Never mix bleach with ammonia, acids, vinegar, or other cleaners. Dangerous gases can result. Use one product at a time and follow its label.
- Painting over the patch: Paint does not remove mold or correct dampness. Clean and dry the surface first; do not paint over mold or water-damaged material.
- Dry-scrubbing or sanding: These actions can release particles into the air. Use a damp cleaning method on suitable hard surfaces instead.
- Cleaning without fixing the cause: Mold can return if a leak, condensation, or persistent humidity remains. Address the moisture, not just the visible mark.
Tips
- Use the least aggressive method that works. Avoid making a wet patch larger than necessary.
- Follow the cleaner’s label, including any precautions and ventilation instructions. Keep products in their original containers.
- After showers or cooking, use an exhaust fan that vents outdoors when available, and wipe away persistent condensation.
- Do not run heating or cooling equipment if you suspect mold is inside it; get the system checked rather than circulating air through a possible contaminated area.
- Take a photo before cleaning if you need to show a landlord or maintenance person where the moisture problem is. Do not delay urgent repairs to document it.
Troubleshooting
The stain remains after cleaning
A dark mark may remain even after surface growth has been removed, or it may be a stain rather than mold. Do not use increasingly harsh chemicals or abrade the surface. If you cannot tell whether growth remains, or the material is damaged, get the area assessed.
The patch comes back
Recurring growth usually means moisture is still present. Check for leaks, condensation, blocked ventilation, or dampness nearby. If you cannot find or correct the source, ask a qualified building professional to investigate.
The affected material is soft, crumbling, or porous
Do not assume wiping the visible face will clean the material through its depth. Avoid cutting or removing it yourself if that could release dust or expose a larger affected area. Keep people away and arrange professional advice about safe removal or repair.
You discover a larger area while cleaning
Stop, leave the material undisturbed, and avoid carrying tools or dusty items into clean rooms. If safe, close off the room and get advice from a qualified remediation professional or building manager.
Frequently Asked Questions
Is all black-colored mold toxic?
No. Color alone cannot identify a mold species or establish its risk. For household cleanup, the important factors are the size and location of the growth, the material affected, and whether the moisture source can be fixed.
Can I clean a small patch with vinegar?
Detergent and water are a suitable first choice for a small patch on a hard, nonporous surface. Do not mix vinegar with bleach or any other cleaner, and follow product labels.
Should I wear a mask for a small cleanup?
Use a well-fitting N95 respirator along with gloves and goggles, and avoid stirring up dust. Anyone with asthma, mold allergies, immune conditions, or related concerns should not do the cleanup.
When should I call a professional?
Get help if the area is about 10 square feet (0.9 square metres) or more, mold is recurring or hidden, porous materials are affected, sewage or contaminated water is involved, or you cannot fix the moisture source.
Do I need to test the mold first?
For a small visible patch, testing is generally not needed to decide to clean a suitable hard surface and correct the dampness. If the problem is extensive, hidden, or recurring, focus on finding the moisture and getting an appropriate assessment.
Related
- How to Shrink Rubber: 5 Methods That Work
- How to Fix a Leaking Sink: Step-by-Step Guide
- How to Shrink Rows in Excel: Quick Steps
Sources: U.S. Environmental Protection Agency. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.