AjapaReporter

Home life · Updated

How to Shrink Objects in Bambu Studio

Time it takes5 min
Steps7in the list below
LevelEasyno special skills
Official sourceBambu Lab Wikicheck it for changes

Quick answer In Bambu Studio, select the object, open the Scale tool, and type a smaller percentage (like 50%) or drag the scale arrows inward to shrink it. Apply to all axes or lock proportions for uniform scaling.

What You’ll Need

  • Bambu Studio installed and opened with a project loaded
  • A 3D model (STL, 3MF, or OBJ) already imported onto the build plate
  • Basic familiarity with the Bambu Studio interface (left panel, top toolbar)

Step-by-Step

  1. Select the object – Click on the model in the 3D viewport or in the object list on the left panel. A bounding box with handles will appear around it.
  2. Open the Scale tool – With the object selected, click the “Scale” icon in the top toolbar (it looks like a square with arrows). Alternatively, press the shortcut key S on your keyboard.
  3. Check the current dimensions – In the scale dialog that appears on the left, you’ll see the current size in millimeters for X, Y, and Z, plus a scale factor (usually 100%). Note the original size so you can calculate the target.
  4. Enter a smaller scale percentage – In the “Scale” field, type a value less than 100 (e.g., 50 for half size). If you want uniform scaling, keep the lock icon (chain) closed so all axes change together. If you need non-uniform, unlock and adjust each axis separately.
  5. Apply the scale – Press Enter or click outside the field. The object will immediately shrink in the viewport. You can also drag the colored arrows on the object itself to shrink visually, but typing is more precise.
  6. Verify the new size – After scaling, check the dimensions again in the same dialog. Make sure the object is still above the build plate (Z height not negative) and that it fits within the print volume.
  7. Reposition if needed – Shrinking may leave the object floating or off-center. Use the Move tool (shortcut M) to place it back on the plate, then click “Slice” to confirm the print is valid.

Common Mistakes

  • Scaling only one axis accidentally – If the lock is open, you might change only X, leaving Y and Z the same, distorting the model.
  • Forgetting to apply – In some versions, you must click “Apply” or press Enter; otherwise the change reverts.
  • Shrinking below printable limits – Very small objects may fail to print because walls become too thin. Bambu Studio may warn, but check yourself.
  • Scaling the wrong object – If you have multiple models, make sure the correct one is selected; the scale dialog shows the name of the selected object.
  • Using the wrong tool – The “Scale” tool is different from “Resize” in some CAD programs; Bambu Studio only has one scale tool, but be careful not to use the “Move” tool instead.

Tips

  • Use the “Uniform scale” lock for most models to avoid distortion.
  • If you need to shrink to an exact size (e.g., 50 mm tall), type the desired dimension directly in the X, Y, or Z field; the scale factor will auto-calculate.
  • For functional parts, check that holes and clearances still fit after scaling – shrinking changes all dimensions, including wall thickness.
  • Use the “Measure” tool (ruler icon) to verify critical distances after scaling.
  • If you plan to print multiple copies, scale one object, then duplicate it – don’t scale each copy separately.

Troubleshooting

  • Object disappears after scaling – It may have shrunk to a tiny size or moved below the build plate. Undo (Ctrl+Z) and re-enter a larger scale, then reposition.
  • Scale dialog doesn’t show – Make sure you have an object selected. If nothing is selected, the scale tool is grayed out.
  • Object becomes non-manifold or broken – Extreme scaling (e.g., 1%) can cause geometry issues. Try scaling in steps (e.g., 50% twice) instead of one huge jump.
  • Slice error after scaling – The model may be too small for the nozzle (e.g., 0.4 mm walls). Increase the scale slightly or adjust wall thickness in the print settings.
  • Scaling doesn’t stick – Some versions require you to click the “Apply” button in the scale dialog. Also check that you haven’t accidentally typed a value but not pressed Enter.

Frequently Asked Questions

Can I shrink an object by a specific millimeter amount?

Yes. In the Scale dialog, directly type the desired dimension in the X, Y, or Z field (e.g., 40 mm), and Bambu Studio will calculate the scale factor automatically. Keep the lock closed for uniform scaling.

Does shrinking affect print quality?

It can. If you shrink too much, walls may become thinner than the nozzle width, leading to weak or failed prints. Bambu Studio may show a warning, but it’s best to check the minimum wall thickness in the preview.

Can I scale multiple objects at once?

Yes. Select multiple objects (hold Ctrl and click each), then use the Scale tool. The scale will apply to all selected objects, but note that they will all be scaled by the same factor, not to the same size.

How do I reset an object to its original size?

You can undo the scale with Ctrl+Z, or re-import the original file. If you know the original dimensions, you can type them back into the scale dialog.

Is there a way to scale in percentages only, not millimeters?

Yes. The Scale field accepts percentages (e.g., 50 for 50%). You can also type a decimal like 0.5, which is equivalent.

What is the difference between “Scale” and “Resize” in Bambu Studio?

Bambu Studio only has a “Scale” tool. Some other software has separate “Resize” for exact dimensions, but here you can achieve both by typing either a percentage or a dimension.

Sources: Bambu Lab Wiki. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.