AjapaReporter

Home life · Updated

How to Tie Air Force 1 Laces: Step-by-Step

Time it takes5 min
Steps8in the list below
LevelEasyno special skills
Official sourceNikecheck it for changes

Quick answer Lace your Air Force 1s snugly by crossing the laces through each eyelet, then tie a standard bow knot. Adjust tension to avoid creasing and keep the tongue centered.

What You’ll Need

  • A pair of Air Force 1 shoes (laces already in them)
  • Your hands (no tools required)
  • Optional: a flat surface to sit on

Step-by-Step

  1. Start with the bottom eyelets: Hold the shoe with the toe facing you. Take the two lace ends and insert each through the bottom pair of eyelets from the outside in, so the ends come out inside the shoe. Pull them until the lace is even on both sides.
  2. Cross the laces: Bring the left lace over to the right side and the right lace over to the left side, forming an X. Insert each end into the next eyelet up, this time from the inside out. Pull snug but not tight.
  3. Continue crisscrossing: Repeat the crossing pattern all the way up: left over right, right over left, inserting into the next eyelet from the inside out each time. Keep the laces flat and untwisted.
  4. Reach the top eyelets: At the top pair of eyelets, insert each lace end from the outside in, so the ends now point downward inside the shoe. This gives a clean, classic look.
  5. Adjust the fit: Pull the laces gently to tighten the entire pattern. Make sure the tongue is centered and not bunched. The shoe should feel snug but not cutting off circulation.
  6. Create the bow base: Take the left lace and make a loop (like a bunny ear). Hold it at the base with your thumb and index finger. Do the same with the right lace.
  7. Tie the knot: Cross the right loop over the left loop, tuck it under, and pull through to form a standard bow. Pull the loops outward to tighten.
  8. Finish and adjust: Tuck any excess lace ends under the laces or into the shoe if they are too long. Flatten the bow and adjust the loops so they are even.

Common Mistakes

  • Tying too tight: Over-tightening can cause creases on the toe box and discomfort. Leave a little slack at the top.
  • Twisted laces: If the lace twists, it can create uneven pressure. Straighten each lace before pulling through.
  • Skipping eyelets: Missing an eyelet makes the fit loose and looks messy. Always use every pair.
  • Bow comes undone: A loose first knot or uneven loops can cause the bow to slip. Make sure the initial knot is tight before making loops.

Tips

  • Use the top eyelet for a tighter fit: If you have narrow heels, lace through the top eyelet from the inside out and then cross the laces over the top before tying. This locks the heel.
  • Keep laces clean: Dirty laces can stiffen and fray. Wipe them with a damp cloth when needed.
  • Try a different pattern: For a bar-style look, lace straight across instead of crisscrossing. This is purely aesthetic and does not affect function.
  • Double knot for activity: If you are walking a lot, tie a double knot to prevent the bow from coming undone.

Troubleshooting

  • Laces are too short: If you cannot tie a bow, try relacing from the top eyelets down, or use longer replacement laces (standard AF1 laces are about 120 cm).
  • Laces are too long: Tuck the excess under the laces or use a shorter lace. Do not cut them, as this can cause fraying.
  • Bow keeps slipping: Untie and retie, making sure the first knot is tight. If the laces are slippery, try a surgeon’s knot (wrap the lace around the loop before pulling through).
  • Tongue slides to one side: Loosen the laces, center the tongue, and retie, pulling evenly on both sides.

Frequently Asked Questions

What is the best way to lace Air Force 1s to avoid creasing?

Tie them snugly but not overly tight, and avoid bending the toe area when walking. Using a shoe tree when not wearing them also helps.

How long should Air Force 1 laces be?

Standard AF1 laces are about 120 cm (47 inches) for most sizes. If you have a larger size, you may need longer laces.

Can I use a different lacing pattern?

Yes, you can use straight bar lacing, ladder lacing, or even skip the top eyelet for a more relaxed fit. The crisscross method is the most common and secure.

Why do my Air Force 1 laces always come untied?

This often happens if the first knot is not tight enough or the loops are too long. Try a double knot or a surgeon’s knot for extra security.

Should I lace my Air Force 1s tightly?

Not too tight. You want a snug fit that holds your foot in place without cutting off circulation or causing creases. A little slack at the top is fine.

How do I clean my Air Force 1 laces?

Remove them and soak in warm soapy water, then scrub gently with a brush. Rinse and air dry. Do not put them in the dryer.

Sources: Nike. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.