Home life · Updated
How to Wash Lovesac Couch Covers Safely
Quick answer Wash Lovesac couch covers in cold water on a gentle cycle with mild detergent, then air dry or tumble dry on low. Never use bleach or fabric softener, and always wash the cover inside out to protect the fabric.
What You’ll Need
- Mild liquid detergent (free of bleach and optical brighteners)
- Access to a washing machine and dryer (or a drying rack)
- Lint roller or vacuum with upholstery attachment (for pre-cleaning)
- Stain remover (optional, for pre-treating spots)
- White vinegar (optional, for odor removal)
Step-by-Step
- Check the care tag. Look for the sewn-in label on the underside of the cover. It will list the exact fabric blend and any specific washing instructions. Follow those over anything else, as some Lovesac covers (like chenille or velvet) may have special requirements.
- Remove all covers from the cushions and base. Unzip each cover completely and pull it off the foam. Do not force it—if it feels stuck, gently work the fabric loose from the corners. Keep the zippers closed during washing to prevent them from snagging other items.
- Shake out loose debris. Take each cover outside and give it a good shake. Then use a lint roller or vacuum with an upholstery attachment to remove pet hair, crumbs, and dust from the surface. This step prevents dirt from embedding deeper into the fibers during the wash.
- Pre-treat stains if needed. For visible spots, apply a small amount of mild liquid detergent directly to the stain and gently rub it in with your fingers or a soft-bristled brush. Let it sit for 10–15 minutes before washing. Avoid rubbing vigorously, which can damage the fabric weave.
- Turn covers inside out. This protects the outer surface from friction and pilling during the wash cycle. It also helps the zipper area stay intact. If your cover has a zipper, make sure it is fully closed before turning.
- Load the washing machine loosely. Place the covers in the drum without overpacking. A medium-sized Lovesac cover set (one base, two sides, and one back) may need two loads. Overloading prevents proper cleaning and can cause the fabric to crease permanently.
- Use cold water and a gentle cycle. Set the machine to cold (below 30°C / 86°F) and choose the delicate or gentle cycle. Add a small amount of mild liquid detergent—about one tablespoon for a small load, two for a large one. Do not use bleach, fabric softener, or stain removers containing chlorine.
- Dry properly. After the wash cycle ends, remove the covers immediately to prevent wrinkles. You can either air dry them flat on a clean surface or tumble dry on low heat. If using a dryer, remove the covers while they are still slightly damp to reduce shrinking and make reinstallation easier.
- Reinstall covers while slightly damp (optional). If the covers are only a little damp, put them back on the foam cushions. They will stretch slightly as they dry, giving a snug fit. If they are completely dry, use a hairdryer on low heat to smooth out any stubborn wrinkles after reinstalling.
Common Mistakes
- Using hot water: Hot water can shrink the cover or cause the fabric to fade. Always stick to cold.
- Adding fabric softener: Fabric softener coats the fibers with a waxy layer that reduces the cover’s water resistance and can make it feel less soft over time.
- Washing with zippers open: Open zippers can catch on other fabric and tear the cover or damage the zipper teeth. Always close them before washing.
- Overloading the washer: Cramming multiple covers into one load prevents thorough cleaning and can cause permanent creases that are hard to remove.
- Using high heat in the dryer: High heat can melt synthetic fibers or cause the cover to warp. Low heat or air drying is always safer.
- Ignoring the care tag: Different Lovesac fabrics (like velvet or performance chenille) have specific care needs. Skipping the tag can ruin the cover.
Tips
- Wash covers in pairs: If you have multiple covers, wash them together (in separate loads if needed) so they fade evenly and maintain a consistent color.
- Use a mesh laundry bag: For smaller pieces like armrest covers, placing them in a mesh bag prevents them from getting tangled or stretched.
- Add white vinegar to the rinse cycle: A half-cup of white vinegar in the fabric softener dispenser helps remove detergent residue and neutralize odors without leaving a vinegar smell.
- Dry in the shade: If air drying, avoid direct sunlight, which can fade the fabric. A well-ventilated indoor area is best.
- Brush the fabric after drying: Use a soft-bristled brush (like a clothes brush) to restore the nap of the fabric, especially for chenille or velvet covers.
- Keep a spare set: Having a second set of covers lets you rotate them, extending the life of each set and reducing the frequency of washing.
Troubleshooting
- Cover shrank after washing: If the cover is smaller than before, it likely saw hot water or high heat. Try stretching it gently while damp—pull on the seams evenly and let it air dry flat. If it remains too small, contact Lovesac support for replacement options.
- Wrinkles won’t come out: For stubborn wrinkles, re-wash the cover on a gentle cycle with cold water, then dry on low heat for 10 minutes. Remove while still warm and smooth by hand. Alternatively, use a handheld steamer on the fabric while it’s on the cushion.
- Cover has a musty smell: This usually means the cover wasn’t dried completely. Wash it again with a half-cup of white vinegar in the rinse cycle, then dry thoroughly. Ensure the cover is fully dry before storing.
- Zipper is stuck or broken: Check for fabric caught in the zipper teeth. Gently pull the fabric free with tweezers. If the zipper is broken, you may need to replace the cover—contact Lovesac for a replacement part.
- Color bleeding: If colors bleed onto other covers, separate them by color in future washes. Wash the affected cover alone in cold water to see if the stain lifts. Do not dry until the bleeding stops.
- Cover is still dirty after washing: This can happen if the load was too large or the detergent was insufficient. Wash the cover again alone with a little extra detergent, and consider pre-soaking in cold water with a small amount of detergent for 30 minutes before the cycle.
Frequently Asked Questions
Can I put Lovesac covers in the dryer?
Yes, but only on low heat. Remove them while slightly damp to reduce shrinking and make reinstallation easier. Air drying is the safest option.
How often should I wash my Lovesac covers?
Every 3–6 months for normal use, or more frequently if you have pets or children. Spot clean spills immediately to avoid deep stains.
Can I use bleach on my Lovesac covers?
No. Bleach will discolor and weaken the fabric. Use only mild, bleach-free detergents.
Will washing shrink my Lovesac covers?
Cold water and low heat minimize shrinking. Some natural fabrics may shrink slightly on first wash, but reinstalling while damp and stretching gently helps.
Can I wash different Lovesac cover colors together?
It’s safer to wash similar colors together, especially for the first wash, to prevent any color transfer. After the first wash, colors are usually set.
What if my cover has a stain that won’t come out?
Pre-treat with a small amount of mild detergent and let it sit for 15 minutes before washing. For stubborn stains, try a paste of baking soda and water, applied gently. Avoid harsh scrubbing.
Related
- How to Whiten Dental Crowns: Safe Methods
- How to Whiten Clothes: 8 Simple Methods That Work
- How to Wash Blueberries Properly
Sources: Lovesac Support. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.