AjapaReporter

Home life · Updated

How to Print Tarp Paper in Word

Time it takes10 min
Steps7in the list below
LevelEasyno special skills
Official sourceMicrosoft Supportcheck it for changes

Quick answer Set Word to a custom paper size matching your tarp, arrange your design, and print with the right scaling and printer settings.

What You’ll Need

  • A tarp (plastic or vinyl) that fits your printer’s feed path, or a large-format printer if the tarp is bigger than standard paper.
  • Microsoft Word (desktop version recommended; the web version has fewer page setup options).
  • Printer drivers installed and the tarp loaded correctly (check your printer manual for media type).
  • Optional: a cutting mat and tape if you need to piece multiple sheets together.

Step-by-Step

  1. Measure your tarp. Use a tape measure to get the exact width and height in inches (or cm). Tarp sizes are often nominal, so measure the actual printable area – subtract a margin from each edge if the tarp has grommets or a hem.
  2. Open Word and set custom page size. Go to Layout (or Page Layout) → Size → More Paper Sizes. In the dialog, enter your tarp’s width and height under Paper Size. Click OK. If your printer doesn’t support that size, Word will show a warning – you may need to use a larger printer or split the design.
  3. Set margins to zero (or minimal). Still in Layout, click Margins → Custom Margins. Set all margins to 0. If your printer has a minimum margin (often 0.2″ or 5 mm), set them to that value. This gives you the maximum printable area.
  4. Design your content. Add text, images, or shapes. Keep important content at least 0.5″ from the edges to avoid being cut off. Use large fonts and high-resolution images (300 DPI recommended) for crisp output on a big tarp.
  5. Check the print preview. Press Ctrl+P (or File → Print). In the preview, verify that the page size matches your tarp and that nothing is clipped. If content is cut, reduce margins or scale down the content.
  6. Adjust printer settings. In the Print dialog, click Printer Properties (or Preferences). Set the paper size to match your custom size (choose “Custom” if available), select the correct media type (e.g., “Vinyl” or “Heavy Paper”), and choose the highest quality setting. Disable “Fit to Page” if it’s on – you want 100% scale.
  7. Print and monitor. Load the tarp into the printer’s manual feed slot (if it’s a standard printer) or use the large-format printer’s roll feed. Start printing and watch the first few inches to ensure the tarp feeds straight. If the tarp jams or skews, cancel immediately and adjust the guides.

Common Mistakes

  • Wrong paper size in printer settings. Even if Word is set correctly, the printer driver may default to Letter or A4, causing scaling or cropping. Always set the printer’s paper size to match.
  • Zero margins not supported. Most printers can’t print edge-to-edge. If you set margins to 0 and the printer ignores it, you’ll get white borders – adjust margins to the printer’s minimum.
  • Feeding a tarp that’s too thick. Standard home printers can’t handle thick vinyl tarps. Check your printer’s specifications for maximum media weight. If it’s too thick, use a large-format printer or print on paper and laminate.
  • Not accounting for grommets. If your tarp has metal eyelets, they can catch on the printer’s rollers. Position your design to avoid them, or remove the grommets before printing.
  • Scaling to fit. Word’s “Scale to Paper Size” option (in some versions) can shrink your design. Turn it off or set it to 100%.

Tips

  • Test on regular paper first. Print your design on standard paper at the same custom size (if possible) to check layout and alignment before using the tarp.
  • Use a template. Create a Word document with the exact tarp dimensions and save it as a template for future projects.
  • For large tarps, split the design into tiles. In Word, you can create multiple pages of the same size and print each page separately, then tape them together. Or use a dedicated poster-printing tool.
  • Ensure the tarp is clean and dry before printing. Dust or moisture can cause ink to smudge or not adhere.
  • If using inkjet, use pigment-based ink for better water resistance on plastic. If using laser, check that the toner will bond to the tarp material.

Troubleshooting

  • Print comes out scaled down. Go to File → Options → Advanced → under Print, uncheck “Scale content for A4 or 8.5 x 11” paper sizes. Also check the printer settings for “Fit to Page” and disable it.
  • Content is cut off at the edges. Increase your margins slightly (e.g., 0.3″) or reduce the size of your content. Use the print preview to see the actual printable area.
  • Tarp jams in the printer. Stop printing immediately. Gently pull the tarp out, check for any obstructions, and ensure the tarp is flat and not curled. If the tarp is too thick, you’ll need a different printer.
  • Ink smudges on the tarp. Allow the print to dry completely before handling. Some tarp materials require a special coating or primer for ink adhesion. Consider using a spray sealant after printing.
  • Word won’t let me set a custom size. The option may be hidden under More Paper Sizes in the Size dropdown. If it’s greyed out, close the dialog and reopen it. If still not available, update your printer driver or use a different printer.
  • Print preview shows multiple pages. This happens when your content exceeds the custom page size. Make sure the page size matches your tarp exactly, and reduce the content size or split it into sections.

Frequently Asked Questions

Can I print on a tarp with a regular home printer?

Only if the tarp is thin enough (like a lightweight plastic sheet) and fits within your printer’s paper path. Most home printers can’t handle thick vinyl or large formats. Check your printer’s manual for maximum media thickness and size.

How do I set a custom paper size in Word?

Go to Layout → Size → More Paper Sizes. Enter the width and height in the dialog. If your printer doesn’t support that size, you’ll see a warning – you can still proceed but the printer may not print correctly.

What if my tarp is larger than my printer’s maximum paper size?

You have two options: use a large-format printer (available at print shops) or split your design into multiple smaller pages and tape them together. Word can print each page separately if you set the page size to a fraction of the tarp.

Why is my printout smaller than the tarp?

This is usually caused by the printer driver’s “Fit to Page” option or Windows scaling. In the Print dialog, click Printer Properties and set scaling to 100% or “Actual Size”. Also check Word’s Options → Advanced → Print settings.

Can I use Word to print a banner on a roll of tarp?

Yes, if your printer supports roll paper. Set the page width to the roll width and the height to the banner length. Word will treat it as a single long page. Make sure your printer driver is set to “Roll Paper” mode.

What type of ink works best on tarp?

For inkjet printers, use pigment-based ink (often labeled “waterproof” or “archival”) because it resists smudging on plastic. For laser printers, toner is generally more durable on plastic, but you should test a small area first.

Sources: Microsoft Support. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.