Home life · Updated
How to Stretch Ears: Safe Step-by-Step Guide
Quick answer Stretching your ear piercings to a larger gauge takes patience and proper technique; this guide walks you through safe stretching with tapers or tape, from initial prep to aftercare.
What You’ll Need
- Ear stretching tapers or single-flare plugs in the next size up (usually 1mm or 2g increments)
- Single-flare plugs or tunnels in the new size for wearing after stretching
- Joining oil or balm (e.g., jojoba, vitamin E, or emu oil)
- Isopropyl alcohol or saline solution for cleaning
- Clean towel or paper towels
- Cotton swabs (optional)
Step-by-Step
- Start with healed piercings. Only stretch ears that have been fully healed at the current size for at least 2-3 months. If your piercing is still sore, crusty, or oozing, wait longer.
- Choose the right size jump. Never skip sizes. The standard safe increment is 1mm (about 2 gauge sizes). For smaller gauges (14g to 10g), you can sometimes jump 1mm safely, but for larger sizes, stick to 1mm or even 0.5mm increments. Using a taper that is too large is the #1 cause of tears.
- Clean your hands and tools. Wash your hands with soap and water. Soak your taper and new plug in rubbing alcohol for a few minutes, then rinse with sterile saline or water. Dry with a clean paper towel.
- Apply oil to your ear and the taper. Put a few drops of jojoba or vitamin E oil on your earlobe and massage it in for 30 seconds. Coat the taper and the flared end of the new plug with oil as well.
- Insert the taper slowly. Align the taper’s tip with your piercing hole, and push it through with gentle, steady pressure. Do not force it. If you feel sharp pain or resistance, stop. The taper should slide through without much effort. If it doesn’t, you’re not ready.
- Follow with the plug. Once the taper is through, immediately push the plug (attached to the taper) through the hole, so the plug sits in your ear. Remove the taper. The plug should fit snugly but not tight.
- Clean and care for the new stretch. Rinse your ear with sterile saline or mild soap and water. Pat dry. Avoid touching it with dirty hands. Clean it twice a day with saline spray or a gentle soap.
- Wait before the next stretch. Leave the new plug in for at least 4-6 weeks (or longer for larger sizes) before attempting the next size. Your ear needs time to heal and loosen naturally.
Common Mistakes
- Skipping sizes. Jumping from 14g to 10g or larger can cause tearing and blowouts. Always go in 1mm increments.
- Stretching too fast. Stretching before your ear is ready, or within a few weeks of the last stretch, leads to micro-tears and scar tissue.
- Using acrylic or low-quality jewelry. Acrylic can harbor bacteria and cause reactions. Use implant-grade titanium, glass, or surgical steel for healing.
- Forcing the taper. If it hurts, you’re not ready. Forcing can cause a ‘blowout’ where the inner layer of skin pushes out the back.
- Neglecting aftercare. Not cleaning your ears or jewelry can lead to infection. Keep them clean and dry.
Tips
- Massage your earlobes daily with oil to improve blood flow and elasticity.
- Take a warm shower before stretching to soften the skin.
- Use tapers for smaller sizes, but switch to taping (wrapping PTFE tape around the plug) for larger stretches (above 2g) for a gentler, more gradual expansion.
- Keep your jewelry in at all times, even at night, to prevent shrinkage.
- If you plan to go back to a smaller size, your ears may shrink, but they may never fully close to the original piercing size.
Troubleshooting
- Sharp pain or resistance: Stop immediately. Remove the taper and put your old jewelry back in. Wait another month before trying again.
- Bleeding or tearing: This is a serious injury. Remove jewelry, clean with saline, and see a piercer or doctor. Do not re-stretch until fully healed.
- Blowout (red ring of skin on the back): Downsize to a smaller plug immediately, treat with warm saline soaks, and let it heal. It may take months.
- Infection (redness, swelling, pus, heat): Do not remove the jewelry unless advised by a professional, as it can trap the infection. Clean with saline and see a doctor if it doesn’t improve in 48 hours.
- Plug falls out: If your ear has stretched on its own, you may need a larger size. But if it’s too loose, downsize to prevent tearing.
- Itching or rash: Could be a reaction to the jewelry material. Switch to implant-grade titanium or glass and see if it resolves.
Frequently Asked Questions
How long does it take to stretch ears?
Each stretch takes about 4-6 weeks of healing, but larger sizes may need 2-3 months between stretches. The whole process to reach 00g can take 6-12 months or more.
Does ear stretching hurt?
It should not hurt if done correctly. You may feel pressure or a slight sting, but sharp pain means you’re forcing it. Discomfort that lasts more than a few days is a sign to downsize.
Can I stretch my ears with silicone?
No, silicone is porous and can harbor bacteria; it should never be used for initial stretching. Use it only for healed, fully stretched ears.
Will my ears go back to normal if I take the jewelry out?
It depends on size and how long you’ve been stretched. Small sizes (up to 8g) often shrink back, but larger sizes (above 0g) may not fully close. There is no guarantee.
What’s the best material for stretching?
Implant-grade titanium, glass, or surgical steel are best for initial stretching. They are non-porous and less likely to cause reactions.
Can I stretch my ears with a taper and then put in a plug?
Yes, that’s the standard method. The taper guides the plug, but you should never wear the taper as jewelry.
Related
- How to Whiten Porcelain Crowns
- How to Wash Golf Gloves: Step-by-Step Care Guide
- How to Whiten Nails Naturally: 9 Simple Ways
Sources: Association of Professional Piercers. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.