Home life · Updated
How to Wash Trainers: A Step-by-Step Guide
Quick answer Washing trainers properly keeps them looking fresh and extends their life. This guide covers preparation, hand and machine washing, drying, and common mistakes to avoid.
Trainers take a beating—dirt, mud, sweat, and daily wear. A proper wash not only makes them look new again but also prevents odors and material breakdown. Before you start, check the care label inside the tongue or side: some trainers (especially leather or suede) need special handling. Remove the laces and insoles first, and give them a quick brush to remove loose dirt.
What You’ll Need
- Soft-bristled brush or old toothbrush
- Mild detergent (liquid dish soap or laundry detergent)
- Baking soda (optional, for odors)
- White vinegar (optional, for tough stains)
- Clean cloth or sponge
- Warm water
- Pillowcase or mesh laundry bag (for machine washing)
- Towel for drying
Step-by-Step
- Prepare the trainers: Remove the laces and insoles. If the insoles are washable, set them aside to clean separately. Knock the soles together to dislodge loose dirt.
- Brush off dry dirt: Use a soft-bristled brush or toothbrush to gently scrub the entire surface, especially the soles and seams. This prevents dirt from grinding into the fabric during washing.
- Treat stains: For stubborn spots, make a paste of baking soda and water (or use a drop of mild detergent) and apply with the brush. Let it sit for 10–15 minutes, then scrub again.
- Hand wash (recommended): Fill a basin or sink with warm water and add a small amount of mild detergent. Dip the brush in the soapy water and scrub the trainers thoroughly, paying attention to the toe cap, heel, and sides. Avoid soaking the entire trainer if possible.
- Rinse: Use a clean cloth or sponge dipped in plain water to wipe away all soap residue. Repeat until no suds remain.
- Clean laces and insoles: Wash laces and insoles separately in the same soapy water, then rinse. For insoles, use a gentle scrub and air dry them completely.
- Machine wash (alternative): If the care label allows, place the trainers (with laces removed) in a pillowcase or mesh bag. Use a gentle cycle with cold water and a small amount of detergent. Do not use bleach or fabric softener.
- Dry properly: Stuff the trainers with crumpled paper towels or a clean dry towel to help them hold their shape and absorb moisture. Place them in a well-ventilated area away from direct sunlight and heat sources. Never use a dryer, radiator, or hairdryer—they can warp the soles and shrink materials.
- Reassemble: Once completely dry (this can take 12–24 hours), remove the paper towels, reinsert the insoles, and re-lace. Your trainers are ready to wear.
Common Mistakes
- Using hot water, which can damage adhesives and cause colors to bleed.
- Putting trainers in the dryer, which can melt glue and deform the sole.
- Scrubbing too hard on delicate fabrics like mesh, causing tears.
- Leaving soap residue, which attracts more dirt and can cause skin irritation.
- Drying in direct sunlight, which can yellow white soles and fade colors.
Tips
- Wash trainers regularly—every 2–4 weeks with heavy use—to prevent buildup.
- Use a protective spray (water and stain repellent) after washing to keep them cleaner longer.
- For white soles, a paste of baking soda and hydrogen peroxide (not on colored parts) can brighten them.
- If you machine wash, always use a gentle cycle and cold water to minimize stress.
- Air dry with newspaper inside—it absorbs moisture and helps deodorize.
Troubleshooting
- Stains remain after washing: Try a dedicated sneaker cleaner or a mixture of equal parts white vinegar and water. Apply, scrub gently, rinse, and repeat if needed.
- Odors persist: Sprinkle baking soda inside the trainers and leave overnight, then shake out. For deeper odor, wash the insoles with vinegar and water.
- Yellowing on white fabric: Soak the trainers in a solution of oxygen-based bleach (like OxiClean) and water for 30 minutes, then wash again. Avoid chlorine bleach.
- Mold or mildew: If trainers get damp and smell musty, wipe with a cloth dipped in white vinegar, then air dry completely in a sunny spot (but not direct sun on colored parts).
- Soles peeling: This usually happens from excessive heat or harsh chemicals. If the sole is separating, use a strong adhesive made for shoes, but prevention is key—avoid dryers and harsh detergents.
Frequently Asked Questions
Can I put trainers in the washing machine?
Yes, if the care label says it’s safe. Use a mesh bag, cold water, gentle cycle, and air dry. Avoid for leather or suede trainers.
How do I wash suede trainers?
Suede should not be soaked. Use a suede brush to remove dirt, and for stains, use a suede eraser or a little white vinegar on a cloth. Avoid water as much as possible.
How often should I wash my trainers?
It depends on use. For everyday wear, every 2–4 weeks is good. If you run or exercise in them, wash more frequently to prevent odor and bacteria.
Can I dry trainers in the dryer?
No, the heat can warp the sole and shrink materials. Always air dry.
How do I get rid of bad smell in trainers?
Wash with baking soda and vinegar, and ensure they dry completely. You can also place dryer sheets or baking soda inside overnight.
Is it okay to soak trainers in water?
Soaking is fine for most fabric trainers, but avoid prolonged soaking as it can weaken glue. Use a damp cloth or brush instead of submerging if possible.
Related
- How to Wash Blueberries Properly
- How to Wash Blackberries So They Last Longer
- How to Whiten a Deer Skull: Step-by-Step Guide
Sources: Nike. Menus and buttons can differ slightly by version. Spotted something out of date? Tell us.